Rear spring tower reinforcing - need pix

[bazzle]

GU/GQ with reinforcing across rear towers or to chassis to stop flex. Pics needed please.
Front too if available

Bazzle

[bogged]

I think Shane (big red) had some few yr back, PM hm

[ludacris]

http://www.outerlimits4x4.com/PHP_Modul ... hp?id=1147

LudaCris

[bazzle]

Thanks Ludachris.

Bazzle

[sootygu]

I had these sent to me by a guy who worked at Birdsville Auto. I have heard stories of these breaking and wanted to strengthen them.



[/img]

[AndrewPatrol]

had mine done by Cheezy (when he still did work for the public). He welded up the factory welds again and welded inside the towers as well. then he put a triangular plate on an angle between the tower and chassis, fr and back. All done with out moving the body but a hoist helped heaps. I saw that B'ville ute and its a huge job what he did, probably ok on a ute cos u can take off the tray, or if youflog the crappers out of it. Cheezy reckons his method is same as comp trucks, but I saw one that had the body off and it was a lot better welded, both sides. Front towers not done, apparently unneccesary. Cant be fagged taking pictures, its dark outside!!!!!!!

[AndrewPatrol]

had mine done by Cheezy (when he still did work for the public). He welded up the factory welds again and welded inside the towers as well. then he put a triangular plate on an angle between the tower and chassis, fr and back. All done with out moving the body but a hoist helped heaps. I saw that B'ville ute and its a huge job what he did, probably ok on a ute cos u can take off the tray, or if youflog the crappers out of it. Cheezy reckons his method is same as comp trucks, but I saw one that had the body off and it was a lot better welded, both sides. Front towers not done, apparently unneccesary. Cant be fagged taking pictures, its dark outside!!!!!!!