Outer Limits 4x4 Board

Hi my mate has a 2000 IFS Hilux with a 2" body lift and 32 muddys he is interested in putting on 33's just wondering what people have done to fit 33's on IFS hilux's

mmm... Chop front guards, ball joint spacers and drop front x-member would enable fitting of 33"s easily... would need to change shocks and bash plate tho...


Read here for how to:
http://www.toyotasurf.asn.au/techsite/c ... ension.htm

With a 2 inch body lift you will probably just need to pound the seam inside the inner guard/firewall.
You may need to trim the guards a little too.
But yeah 33s will fit quite easily on IFS.
Paul.

Ausyota is right, but I havent trimmed the guards, not needed, although I am running 33x10.5 not 12.5s.

just incidently, if ur going to insure the beast with 33s, it'll require a roadworthy cert, and I have had probs getting my 33s approved. So far they wont approve for on road use due to tighter regs by RTA in NSW.

K

Ausyota is right, but I havent trimmed the guards, not needed, although I am running 33x10.5 not 12.5s.

just incidently, if ur going to insure the beast with 33s, it'll require a roadworthy cert, and I have had probs getting my 33s approved. So far they wont approve for on road use due to tighter regs by RTA in NSW.

K

A mate is running an 04 with 33 serengetties, they are a slightly more offset rim, and they clear everything AOK with 2" bodylift

Ihave an IFS lux and I am running 33x12.5 MTRs on 8" Landcruiser offset Sunnies.
I have a 40mm bodylift and they rubbed a bit but with the aid of a big hammer they dont touch at all

I trimmed a little under 2" from my front guards right round but simply because Im planning to run bigger tyres when I SAS it and because it looks .
Paul.