Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Power Steering Pump

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 5
Joined: Thu May 05, 2005 12:40 pm
Location: Brisbane

Power Steering Pump

Post by jessie_xa »

Hi All

After a lot of swearing and fiddling I managed to get a new engine mount in place as it was shot from all the fluid coming from the power steering. After cleaning the engine bay with a good degreaser, I thought I found the leak a couple days later and replaced to hose from the reserve to the pump. I cleaned the bay again only to find that it was leaking again. On inspection I could see that the fluid was coming out from the front of the pump then down the hole. (&*^%$#$%^&^$#) and some more.

Q. Can the power steering pump out of a 93RR (RR is 89 but motor is 93RR) be overhauled or as per LR a complete replacement part is required? (yes have gone through tech talk) The pump has two pullies on it a flat belt and a V belt.
Q. If the pump can be overhauled where in Brisbane can one buy a kit and/or seals.

Thanks
Jessie

89 RR 3.9lt
3 diff locks Pro Comp shocks
265/75/16 MTR's
and a lots of modes
Top
Posts: 71
Joined: Fri Dec 19, 2003 9:58 am
Location: Mont Albert, Melbourne

Post by isuzu110 »

I've found All Car Power Steering in Bowen Hills to be quite knowledgable about RR power steering. I've had them rebuild PAS boxes and pumps for me before.
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 1 guest