Outer Limits 4x4 Board

Hi all. I'm posting this up for patroldude.

He's got a spring-over-axle setup to suit MQ-MK patrols. Cause he's in Sydney, the kit had to be engineered for it to be roadworthy.

As far as I know, its two diffs, complete from drum to drum & disk to disk. With most of the steering gear on the front diff.

He's asking around the $1300 mark, and I'm sure that if you PM him, he can send you pics and more info. I've seen this one in his swb, and its really something different!! Its a cheap, hassle-free way to get a soa under your truck - with no worries about the boys in blue nagging you!

So drop him a line on 0410343735, or just PM him - not me!!

Cheers - Coxy

Patroldude should have told you we have a for sale section .....

dan is right, this should be in the forsale section.

Though the kit has been engineered in A vehicle.......

every different vehicle the kit goes into, the rig needs to be re engineered.

the kit is 2 complete hub to hub diffs with brakes done by offroad industries, they have had the knuckles rotated and castor correction all done on them for a shorty, will work in LWB fine also.

Its got the ORI steering with high steer arms and ball joints ( same STEERING ONLY setup as wats on my rig ) comes with RTC dampener.

all u need is brake lines, driveshafts, and to reverse taper ur pitman arm on the steer box.

should be up for under $100 more than wats in this kit,
and workshops usually charge $3000 plus for the conversion

its a good price.

screwy