Outer Limits 4x4 Board

I have just finished swapping the rear diff housing tonight, and will swap the front diff housing tommorrow. is it much the same as the rear? jack up body and support it, jack up diff, undo brakelines, steering, tail shaft, shocks, sway bars and control arms? all pretty straight forward?

I also have to swap the front brakes and hubs over, also fairly easy?

My patrol is a 92 with the big front brakes, auto hubs, standard front diff, and factory locker rear.

the new diffs are out of a early model, with the small brakes, manual hubs, and airlockers front and rear.

thanks

You "may" need to swap diff flanges to suit .

Bazzle

bazzle wrote:You "may" need to swap diff flanges to suit .

Bazzle

flanges i belive are all teh same on all 4.2 models.. the 2.8 and the rb30 motor patrols are the ones with the smaller flanges.

TOM

didn't have to do the front in the end, as the air hose is in the centre, not the housing all that worry for nuthin'.