Outer Limits 4x4 Board

g'day all i'm new to this site so bear with me
i;m also going to be using vh45 my main consern is factory axhaust manifolds dothey fit or will i have to get new ones made?
p.s. cool site

off the back of my head.. from reading other various tech.. i think you'll have to get some custom ones made up.. and move the engine forward a bit..

Have a talk to Hazard off the forums.. this is his site i believe..

http://home.iprimus.com.au/promotive/4x4/Patrol.htm

and the email link is on the specs page.

TOM

i've spoken to hazard through email and it all sounds pretty easy the only mods realy are engine mounts and manifolds
can't wait to go ahead with it
he also has a cool picture of a patrol burning rubber

Good to hear.. and be sure to post up some pics of your progress and whats involved in a tech buildup if you have time..

Im sure many of us would love to do such a conversion but have no idea whats involved...



TOM

love to send some pics soon as i work out how to post them

budala wrote::? love to send some pics soon as i work out how to post them

Not a problem..

i believe this board has a limit on the size of pics...

To make things easier..

Open the picture in MS PAINT

GO to the IMAGE tab

then GO to the 'STRETCH/SKEW'

then in the stretch tab.. change both horizontal and vertical to 50 percent instead of 100.. that should half the size of the picture..

then save it

The image should be ready to upload...

then when you are typing in the post section... scroll down a bit.. and you will see 'add an attachment'.... click browse and select the picture that you just saved via MS PAINT.. then add attachment..

Once done.. then click submit..

Hope that helps

TOM