Outer Limits 4x4 Board

Per topic, I am going through the funding process ATM and require any build pics, suggestions, lessons learnt, what type of sheet you used etc.

Please post here as this may be usefull for someone else in the future.

Cheers

Tiny

are you after a dual cab ? xtra cab setup ?

surely a normal ute cab would be cheaper to use than cutting up a wagon ?

Normal ute cabs are few and far between, they also dont have much room, so I am thinking of doing a xcab desighn and will be watching this post for peoples idea experiances

Dave

will be an extra cab, I want the space for gear as it will be used fosome touring as well

tiny, if u interested in buying a complete cab in a1 condition already coverted to xtra cab call milad on 0414306205..

In the final stages of doing mine.
Have used a leaf cab which bolts straight on to the wagon mounts. Cabs are worth a lot more than wagon bodies - supply and demand.

Later models have just enough room but I would prefer an extra cab.

Am making up a steel tray at the moment, using rear 4 body mounts as tray mounts. 50mm RHS as pedestals for the tray welded to each body mount.

One issue to watch is how you mount your tray - you dont want a hard hit from the rear pushing the tray into the back of the cab..........am not sure if what I'm doing is going to be enough - takes the vertical loads fine.......

Rear end is way lighter, takes some getting used to but the extra zip is good. Will need some adjustable shocks as the existing OME's are valved way too firm for the lighter weight, even with soft coils.

viperguy wrote:tiny, if u interested in buying a complete cab in a1 condition already coverted to xtra cab call milad on 0414306205..

nice, how much ?

a mate of mine has a wagon body in good nic that he want to get rid of.

would take $1250 for it.

I would prefer to tackle this myself and have a decent sixed extra cab and put a cage in while the back is off.....surely someone can give me some tips!!!!!!!!!!!!!!!!!!!!!!!!

Tiny wrote:surely someone can give me some tips!!!!!!!!!!!!!!!!!!!!!!!!

place mark over cab where you want cut, Grab the 9" and go berko,

seriously Link, from the Patrol forum, had a huge write up on his cab chop, might be best to find that, ill see if i can come up with a link

Tiny wrote:surely someone can give me some tips!!!!!!!!!!!!!!!!!!!!!!!!

place mark over cab where you want cut, Grab the 9" and go berko,

seriously Link, from the Patrol forum, had a huge write up on his cab chop, might be best to find that, ill see if i can come up with a link

don't make the extra cab too big if i did mine again i would put the seat right back and make the firewall there. its too hard to get stuff out of and just stores junk. i used to fit my swag behind the seats but the fixed back seats killed that but even with the orig seats i never used it. also with the seat right back you can't see out the side window.

cheers bru

bru21 wrote:don't make the extra cab too big if i did mine again i would put the seat right back and make the firewall there. its too hard to get stuff out of and just stores junk. i used to fit my swag behind the seats but the fixed back seats killed that but even with the orig seats i never used it. also with the seat right back you can't see out the side window.

cheers bru

Yeah, I am in two minds as I want a 6 point in the cab as well as I beleive OBC required a 6 point and prolly would be a PITA to contruct a 6p cage to go out the cab????? any one know what the max angle is for the rear points on a roll cage?

Other thing is need to mount the seats a fair way back as I am 6'6ft so leg and head room with cage will be diffcult.

Cutting is not the issue, I have plenty of expeirience cutting suff up etc, but welding sheet metal me no like and what is the best way to finnsh off the outside of the cab?

I like the lenght of yours Bru, but I cant remember if you have a side window!!! I knoe big green meany doesn't, was also considering a suicide door on one side to get stuff in and out, how hard would it be to do something like this? would it be usefull, or would it be to small a door to be any good considering the piller is there?

Would like to decide where to chop as I hope to put a cage in in the next couple of weeks, may be chopping it that soon depends on the cash issue (selling the GU) cheaper to run around in a falcon ute or something.

Ok, Thanks fo Big green meeny I contactedl Brett at On Track 4wd in Moss st slacks Creek in brissy 0732902533 who can supply a pressed back plate to save pissing around with sheet. These are around $450.00 ex Brissy. I will get on I think, and post on the how it went how easy etc