Page 1 of 1
Shift Bush
Posted: Tue May 24, 2005 7:26 pm
by Crawford
Hey,
ANyone know where i can get a shift bush for underneath the transfer lever for a 1987 sierra 1.3L
I have tried genuine suzuki, Repco (suzuki told me to try there), coventrys, and many other places
Do i reall yneed this part? it still all works except it gets jammed in 4Low
cheers
Posted: Tue May 24, 2005 7:30 pm
by nicbeer
Yes you do need it.
Try suzuki again. there lying. Its called a shifter sheet or transfer bush.
cheers
Posted: Tue May 24, 2005 7:33 pm
by Crawford
What does it actually do?
Posted: Tue May 24, 2005 7:40 pm
by RB zook
im in need of one too
pm mud 4b he has one for like 30 bucks
Posted: Tue May 24, 2005 7:48 pm
by Crawford
Transfer Shifter Bush Polyurethane
Is that what i want?
its a little round red thing?
let me know
Posted: Tue May 24, 2005 8:05 pm
by RB zook
yeah sounds rite
should be like28 bucks
Posted: Tue May 24, 2005 9:02 pm
by -Mick-
get a spare and put it in the tool box
they tend to go when you're actually using 4wd.... ie bum&$*# nowhere
Posted: Tue May 24, 2005 10:36 pm
by Crawford
hrm do i just take the transfer stick out and put it below that? and put some grease on it?
Re: Shift Bush
Posted: Tue May 24, 2005 11:30 pm
by mike
Crawford wrote:Hey,
ANyone know where i can get a shift bush for underneath the transfer lever for a 1987 sierra 1.3L
I have tried genuine suzuki, Repco (suzuki told me to try there), coventrys, and many other places
Do i reall yneed this part? it still all works except it gets jammed in 4Low
cheers
Call One Stop Suzi shop in SE QLD on (07) 5596 3844
Never been in there but delt with them from afar on several occasions and have always had a great result.
I'll be stunned if he can't help you.
Posted: Wed May 25, 2005 8:30 am
by mud4b
i have nolathane shifter bushes in stock..
$18 + freight for ol members
Posted: Wed May 25, 2005 8:48 am
by mike
mud4b wrote:i have nolathane shifter bushes in stock..
$18 + freight for ol members
Onya Mud4b, Even better...
support the guys that support us...
Suziworx
18 Kayleigh Drv Maroochydore 4558 (07) 5479 1877
http://www.suziworx.com/
Posted: Wed May 25, 2005 10:08 am
by Crawford
Hey how do i install it? do i just drop it below the transfer lever?
Posted: Wed May 25, 2005 10:12 am
by mud4b
you put it in on a angle so that it drops below one of the retaining pins.
then you just lever it over the other retianing pin and push it down.
Posted: Wed May 25, 2005 10:31 am
by Crawford
hrm have taken transfer case apart many times and havent seen the pins.. are they just below the ball of the transfer stick??
Posted: Wed May 25, 2005 10:47 am
by mud4b
these are the pins
Posted: Wed May 25, 2005 10:48 am
by mud4b
this is how you install the bush
Posted: Wed May 25, 2005 5:55 pm
by RB zook
i need one mark
and also need a transfer shifter
Posted: Wed May 25, 2005 11:28 pm
by 87suzi
I'll never understand. My dad helped me with fixing my TC and he put a metal washer type thing. It only acts as a spacer, and being metal it's better than the proper ones you buy cause it ain't gonna come apart.
Posted: Sat May 28, 2005 6:58 am
by nicbeer
Posted: Sat May 28, 2005 8:36 am
by flyinwall
here go mudy i "cleaned" em up a bit for ya!
