Page 1 of 1
Patrol Diffs deatils spec search...
Posted: Mon Jun 02, 2003 10:47 am
by Wooders
OK I keep hearing that Patrol diffs are strong as.....Well I'm really after some detailed specs and years etc....
Is there anywhere online that has a comprehensive list of the details I'm after......eg Ratios, shaft sizes, splines, wms2wms dimensions, years, options (eg LSD etc)......
Posted: Mon Jun 02, 2003 3:47 pm
by roly
arb locker sheet on their site
Posted: Mon Jun 02, 2003 9:44 pm
by big red
Posted: Tue Jun 03, 2003 8:47 am
by Wendle
roly wrote:arb locker sheet on their site
wow, there is an awesome amount of info on that one page..
http://www.arb.com.au/alac/AU_International/215109.pdf - page#7
wooders, the only thing missing on that page is the ring gear diameter, which is in metric is the axle name ie: H233 is 233mm.
Ratio's from nissan - 3.9, 4.11, 4.3, 4.625
Aftermarket - 4.88
Arctic trucks can supply 5.29 & 5.71, but I don't think anyone has used them in this country??
Posted: Tue Jun 03, 2003 9:59 am
by Wooders
Legend stuff lads.....
Posted: Tue Jun 03, 2003 11:15 am
by Wooders
It's bloody interesting to compar all those rigs/axles next to each other....
It would be nice to know all the available ratios and available lockers etc for all - but that's for the Patrol ones Wendle...
Asside from that the other things I was after was MWS2MWS dimensions.... But I guess I can hunt those down.....
Posted: Tue Jun 03, 2003 1:15 pm
by Wendle
If it is still daylight when I get home, I'll measure mine (GQ/mav) I am pretty sure the GU ones are ~30mm wider.
Posted: Tue Jun 03, 2003 2:19 pm
by Wooders
No hurry - I'm just formulating a few plans
Posted: Tue Jun 03, 2003 2:42 pm
by Wendle
If it's for a wrangler the front driveline is on the wrong side
Posted: Tue Jun 03, 2003 3:54 pm
by bj on roids
consider material quality too. jap gear is good. but shear size 9" and dana 60!
Posted: Mon Jun 16, 2003 8:06 pm
by Hoonz
hijacking this thread .... how hard is it to put GU diffs under a GQ?
Posted: Mon Jun 16, 2003 10:37 pm
by MKPatrolGuy
Terrafirma wrote:hijacking this thread .... how hard is it to put GU diffs under a GQ?
http://www.outerlimits4x4.com/PHP_Modul ... php?t=4194
Posted: Tue Jun 17, 2003 8:36 am
by Wendle
I just realised I still haven't taken that measurement for you, wooders.. Sorry.
Soon..
Posted: Thu Jun 19, 2003 3:08 pm
by Maggot4x4
Wooders wrote:It's bloody interesting to compar all those rigs/axles next to each other....
It would be nice to know all the available ratios and available lockers etc for all - but that's for the Patrol ones Wendle...
Asside from that the other things I was after was MWS2MWS dimensions.... But I guess I can hunt those down.....
Front Track 1580 mm
Rear Track 1585 mm
Posted: Thu Jun 19, 2003 3:21 pm
by Wendle
what rims is that with? My track is ~1650, but I still haven't measured the mounting width, or found it listed anywhere....
Posted: Thu Jun 19, 2003 7:58 pm
by Maggot4x4
Wendle wrote:what rims is that with? My track is ~1650, but I still haven't measured the mounting width, or found it listed anywhere....
That I don't know, I got the measurement off an old brochure I had lying around. 1989 Mod ST.
Posted: Fri Jun 20, 2003 9:20 am
by Wendle
Cool, that is with standard rims, then. A strange little fact is that ford dealers put landcruiser offset rims with 31x10.5s on some mavericks to make them look beefier than the patrols in the yard nextdoor, thereby defying ADR's on a brand bew vehicle
Posted: Mon Jun 23, 2003 10:42 am
by bj on roids
Wendle wrote:Cool, that is with standard rims, then. A strange little fact is that ford dealers put landcruiser offset rims with 31x10.5s on some mavericks to make them look beefier than the patrols in the yard nextdoor, thereby defying ADR's on a brand bew vehicle
what is a bew vehicle?
Posted: Mon Jun 23, 2003 10:43 am
by bj on roids
Wendle wrote:I just realised I still haven't taken that measurement for you, wooders.. Sorry.
Soon..
He was "keeping in line with indsutry standard practices"
Posted: Mon Jun 23, 2003 11:42 am
by Wendle
NEW vehicle, sorry
"indsutry" WTF is that
Posted: Mon Jun 23, 2003 7:39 pm
by A1
I know this has been asked b4 but wat make (model) of pootrol came out with 4.6,s ?
Cheers Dan
Posted: Mon Jun 23, 2003 8:37 pm
by ozy1
from what i have heard it was the 2.8L Turbo GU patrol,
this is only from what i have heard, and i want those ratios.
Shawn
Posted: Tue Jun 24, 2003 2:49 pm
by Maggot4x4
A1MAV wrote:I know this has been asked b4 but wat make (model) of pootrol came out with 4.6,s ?
Cheers Dan
2.8L GQ
Posted: Tue Jun 24, 2003 10:24 pm
by A1
Danka for da info
Posted: Wed Jun 25, 2003 4:47 pm
by bazzle
Diff crown wheel diam is same as part no.
ie H260 260mm
h233 233mm
etc
bazzle