Page 1 of 1
custom tie rod pics
Posted: Sat May 28, 2005 10:28 pm
by N*A*M
no real tech, just photos of the tie rod awill4x4 made. it's 6mm wall cr-mo.
1. close up of his welds
2. close up of machined ends
Posted: Sat May 28, 2005 10:29 pm
by N*A*M
it's half the weight of my old one and should be stronger too.
3. tube thickness can be seen here in comparison to my watch
4. painted and installed
Posted: Sun May 29, 2005 9:18 am
by ozy1
very nice, looks the goods,
now, please tell us you used more tools than one hammer and a shifter to put it in place
Posted: Sun May 29, 2005 11:55 am
by N*A*M
don't need anything more than that hehe
it's a 1 banana mod
Posted: Sun May 29, 2005 6:54 pm
by Hoonz
wish my booger welds looked like that
Posted: Mon May 30, 2005 6:29 pm
by fatassgq
Have you got a pic of the bar from further away? Just a straight on one before it was painted?
Posted: Mon May 30, 2005 6:45 pm
by N*A*M
no more unpainted pics. but i can take a front-on one with it mounted if you want.
it's 1.2m in length without the rod ends. measurement for the ram bracket wouldn't help you unless you were using mq knuckles and the same ram.