Outer Limits 4x4 Board

Hi i bought my 40 series in bits and am nearly finished rebulding it. On the radiator support there are to bits of threaded rod approx 10 mm in dia that go from the radiator somewhere on the chassis. as i bought it in bits i dont know where it bolts to the chassis in the engine bay. So im wondering if a fellow 40 ser owner can have a look in their engine bay and shed some light for me. A detailed description or digital camera photo would be greatly appreciated.

Hope this helps
Mine is bolted to the chassis but has being welded after it broke, it's the short rod that I used have break all the time

Dazz

i think the rods are welded to the chasis...sorry me bad there bolted,
its was dark and i was to lazy to get the light out...

drivers side



passenger side

sorry about the oversize pics

mmm and they break when u lay it on its side too

The drivers side rod is a shorter rod that bolts to the battery tray... the passenger side one bolts to the top of the chassis near the engine mount... key word "BOLTS"

unwritten wrote:The drivers side rod is a shorter rod that bolts to the battery tray... the passenger side one bolts to the top of the chassis near the engine mount... key word "BOLTS"

is it opposite on a diesel

Battery is on r/h/s in my petrol

phew I thought I was going crazy

I better reverse my pic

thanks 4 that

Got to love the internet along with digital cameras takes the guess work out of what your trying to explain.


Cheers BJ

bj42turbo wrote:Got to love the internet along with digital cameras takes the guess work out of what your trying to explain.


Cheers BJ

lol...... i tried to resize the pics however im lucky enough to be able to post pics..(noob)