Page 1 of 1

are 8in sunnies too wide?

Posted: Sun May 29, 2005 8:22 pm
by Tzi
I bought some trak2 sunnies on ebay last month, and after much hastles they have arrived.
The guy said they previously had 10.5x31 R15's on em... which after looking around seems to be rather common on a feroza.
My question is.... They are 8in wide, not 7in.... is that going to be a problem... and if so.. how much do i need to lift it? :roll:

Posted: Sun May 29, 2005 8:42 pm
by Ferwoaza
I run my 31's on 8" Sunnies, no problems here with my lift...

Posted: Sun May 29, 2005 9:28 pm
by Tzi
I cant remember... was yours a 2in lift or 2+2?

Posted: Sun May 29, 2005 9:58 pm
by Ferwoaza
2.5" suspension, 2" body..and still scrub at full lock sometimes

Posted: Sun May 29, 2005 10:01 pm
by senergy
i just bought 8" sunnies and 30" bfg's, im hoping a 2" suspension lift will be enough, guess i will find out next week.

Posted: Mon May 30, 2005 8:21 am
by HeathGQ
senergy wrote:i just bought 8" sunnies and 30" bfg's, im hoping a 2" suspension lift will be enough, guess i will find out next week.
should be but will depend on offset.

Posted: Mon May 30, 2005 10:46 am
by BenDover
senergy wrote:i just bought 8" sunnies and 30" bfg's, im hoping a 2" suspension lift will be enough, guess i will find out next week.
Senergy can you please upload some pics or emial me some when you have done it? I am planning on getting 2" suspension lift soon and bigger wheels and I would like to see some finished results of this before I do!

Cheers
Ben

Posted: Mon May 30, 2005 6:30 pm
by senergy
sure can, mine's a narrow track not a wide track like yours though. im hoping it will make mine look tougher :)

Posted: Fri Jun 10, 2005 1:25 pm
by senergy
ive jacked my car 2 inches and put on the 8inch sunnies, or in my case speedy desert rat et28's and it looks FAT and tall. will put some pictures up in a few days. The wheels do hang out past the guards so if your worried about the FUZZ then 8's are probably too wide.

Posted: Fri Jun 10, 2005 8:08 pm
by Tzi
Bring on the piccies!!! :D
2in lift...obviously you wound up the bars at the front... but how did you do that back?