Outer Limits 4x4 Board

i get me front n rear diffs saturday morn wOOt

hopefully done this weekend

will keep u informed

Good for you mate.

Keep us posted on the details of the swap and dont forget to take plenty of pics.

Good luck.

hey mull can i have ur rocky diffs well just the front one

how hard would it be to make it rear steer on my rocky i understand a second steering wheel and the fact that left ould be right and visversa
just wondering


cant wait til the weekend!!!

So does it mean you are still going to Landcruiser park? Good luck and we need lots of pics

flynn wrote:hey mull can i have ur rocky diffs well just the front one
how hard would it be to make it rear steer on my rocky i understand a second steering wheel and the fact that left ould be right and visversa
just wondering


cant wait til the weekend!!!

Massive job if ya plan on re-using the rocky front. The centre would be offset to the left hand side of the rig for starters. And the 2nd steering wheel would be crazy, you would need to fab up hydro steer for the rear steer. Plus a million other things that im too tired to think of at the moment. But if you are keen, dont let anyone stop you. Basicaly it wouldnt be worth it in the end im my opinion compared to other mods that could be done.
.
Layto....

I would be interested in seeing the end result. I have seen some monster trucks which have rear steer and they actually have a joystick sort of scenario on the centre console. Might be easier and less intrusive than a second steering wheel... where would you put it?

I would be interested in seeing the end result. I have seen some monster trucks which have rear steer and they actually have a joystick sort of scenario on the centre console. Might be easier and less intrusive than a second steering wheel... where would you put it?

Is there an echo in here?

Cheers Paul

good idea flynn y dont u go buy some more stickers n go
sit in the corner while us big boys talk mechanics

ive renamed it "project died in the a$$" so it has been postponed till
after this weekends outin at cruiser.


so far:
Taken photos with 32x10.5 A/Ts stix out about 2" both sides

measurements:
rocky drum to drum......~46" (1170-ish mm)
mk drum to drum.........~51.5" (1310-ish mm)

HEY!!!
i got nothin i just think its funny that we'll both 5h17 all over wills 60 series.

i was thinkon that we should save the diffs for a buggy or something coz yeah frankly i couldnt b stuffed workin out all that stuff, but a joystick is a good idea, i figure if u could find room u could stick down near the gear stick.
its alright theres still time il do that when im older and wiser. (pfft)
if some1 could give me somewhere to start i might think about it

on the week end flynn il show u wat a real 4B is.. the 60 will eat ur car

umm yeah a locked 60 with 6inches lift for $6000 i think i could kick ur a$$ in 2wd ill b waitin for ya at the top of locker av
and for all those out there that dont really care and can see how far off the post im getting i have a stock 88 turbo diesel rocky, wait scrap that it has an aftermarket intercooler BOOYAH! and a novelty horn so for all those at cruiser park this weekend im the annoying one making animal and siren noises, well who evers in the passenger seat coz il b watchin the road.

il b cin u at the top of locker av wen i poull that brick of urs up

how about we do locker av mike.. do u wanna..... u gota promise to do it

yes 'pullin that brick of urs up' u said it not me
would u want me to get ur 75 and tow ur 60 back down, better yet how bout i roll them back down

and to think this alstarted coz of nissan diffs
i blame u mull and nissan god damn nissan

il pay that bloody nissans... its all good mike im just havin bit of fun

see look wat nissan has done they've gone and made poor little willy repeat him self.

nissan!!!!

don't blame nissan mike...will always repeats himself...its so he can remember what he just said! let me know how da trip went...rockys vs 60

nah nev the buttons on the key board were sticky... n the week end went great i learnt how to chage CV joints real quik.. n mikes car broke on diaper creek

hey it....hang on im movin this post to gen chit-chat so that mull can get on with his diff swap

oh and mick says all the fidley shit is going to be harder than u think.

have fun

decided its too wet n im too sic to keep grinding these mounts off...
gonna quiz superior engineering, or another custom place in qld.

so far both mounts on the rear have been removed, n almost ground flush to the housing. fronts r Grimace n cast so it sh*ts me

im currently after opinions on suspension set up:

mq/mk springs SPUA (3 leaves rear, 4 front)
scissor shackles front
superior engineering drop shackles rear
rear shox /\ configuration... procomp or whatever i can get
front custom hoops


cheers mull
tyres will be whatever i can get (33/35s) on 15x10 steels

Spartacus wrote:decided its too wet n im too sic to keep grinding these mounts off...
gonna quiz superior engineering, or another custom place in qld.

so far both mounts on the rear have been removed, n almost ground flush to the housing. fronts r Grimace n cast so it sh*ts me

im currently after opinions on suspension set up:

mq/mk springs SPUA (3 leaves rear, 4 front)
scissor shackles front
superior engineering drop shackles rear
rear shox /\ configuration... procomp or whatever i can get
front custom hoops


cheers mull
tyres will be whatever i can get (33/35s) on 15x10 steels

Well done man.
Keep at it. It will be awesome either way.

hmm go SPOA and extended shackles

flynn wrote:hmm go SPOA and extended shackles

suck my left testical.....

$$ update:
500 - diffs
$5 for cutting discs

still cheaper than 2" wheelspacers

after taking many measurements i have found that nissan front mount dont have to be changed as they appear to line up around half-1mill.

the distance from the center of the diff to the spring perches measures:
----rocky: 340~
---nissan: 340~

Distance between perches
rocky.......... 680mm~
Nissan mk....675mm

its hard to measure properly but im almost 89% certain this will be a piece of pisss and have it runnin when i can afford to get teh suspension.

anyone got measuments of mk/mq eye-eye or to centerbolt (front n rear) would be very helpful..


thanx for your patience
oh and rocky RUF wont fit, it pulls the diff backward about 2"
feroza rears fit rocky & have a longer load leaf.

Spartacus wrote: anyone got measuments of mk/mq eye-eye or to centerbolt (front n rear) would be very helpful...

Throw this question over to the Nissan section.

Unfortunately, Ive got a GQ which is completely different. I would've done the measurements otherwise.

Rod

Spartacus wrote:anyone got measuments of mk/mq eye-eye or to centerbolt (front n rear) would be very helpful..

You after the leaf spring measurements? Gap between springs or something else?

I have a MQ rolling chassis sitting in my backyard so any measurements you want i can grab off it.