Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

IFS rear springs

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 283
Joined: Fri Nov 01, 2002 1:16 pm
Location: Rowville, VIC

IFS rear springs

Post by .MYTLUX. »

i will be getting a set of 2000 IFS dual cab springs during the week for cheap.

what should i do to get decent flex and around 2" of lift??

i have: standard shackles/ 4" extended ones/ standard rear pack from 90 s/c + will have the above IFS springs.

they are 3" longer right?? i was thinking i could remove a leaf (nfi which one), open the clamps and use my extended shackles, does this sound allright???

i am unsure what im am going to do about shocks yet, any cheaper options than $480 for a weld on kit and rancho's would be apprecieated.

p.s. on the front i have reset springs (2-2.5" over stock) + ome shocks, i realise it is difficult to get good flex from the front while maintaining driveability/steering on flex etc.. so i will just leave front for the moment, and TRY to get the rear workin ok.


thanks in advance fellas
Blair,

90 2.8D HILUX s/c
33" BFG m/t
Posts: 549
Joined: Mon Oct 28, 2002 11:53 am
Location: Sydney

Post by slowhilux »

Blair,
Im currently doing the same thing. To get the height i will be making up a set of shackles, and also mounting a new hanger on either side further down the chassis rail. Im doing this cos i have got the springs redrilled so that the hole is in the centre of the pack (nice tip ben!!), ie, more flex. This will also allow me (with a bit of rooting around) to get the diff to sit in the original position. My springs are off an LN106, and they are ~110mm longer than the ones i have in it now. If the ride height suffers after all this i will use some lift blocks (read: cut up overload springs!), to get it back to what it was. As for the front, the springs i have in it flex fuggin good at the moment (ask Surfection!), the only limiting thing being the shocks....
Phill
1995 DX 80 series, brought to you by:- 1HDFTE, A750, PWR, Secret Squirrell Steinbauer, BFG, GME, Engel, ARB, Kaymar, and my empty wallet!
Posts: 283
Joined: Fri Nov 01, 2002 1:16 pm
Location: Rowville, VIC

Post by .MYTLUX. »

i was trying to avoid moving hangers/shackle mounts :cry: so can it be done like this????

i know people do with mazda's which i thought were the same lenght, 51" eye to eye, is this right???

ive got my front reset springs and shocks on, im happy with the flex they have atm, as the soften it will improve further, but my shocks will also limit flex.
Blair,

90 2.8D HILUX s/c
33" BFG m/t
User avatar
POS
Posts: 4318
Joined: Tue Oct 22, 2002 8:52 pm
Location: Perth

Post by POS »

MYT, you should be able to get Ranchos 9012's for about $170.00 each.

Rancho have just released longer shocks but how much longer i dont know and for what price i dont know either.

Rancho's are defently the right choice.
Posts: 4990
Joined: Sun Oct 20, 2002 7:22 pm
Location: Qld, Hilux Country

Post by bubs »

14.5 in of travel i think richard told me today

POS - ranchos are now $200 each with the X series
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!

Custom Parts & Fabrication!
Ph: 0417 708 598
Posts: 283
Joined: Fri Nov 01, 2002 1:16 pm
Location: Rowville, VIC

Post by .MYTLUX. »

yeh that $480 was a snake special, which was 2 rear 9-stage rancho's + weld on kit. saving of $20.

what would be ideal for a pov arse like me would be 2nd hand rancho's, perhaps if someone was upgrading to the longer ones.

GUTS could u give me info on the long travel OME, i think u said they were from buggyies or somethin.
Blair,

90 2.8D HILUX s/c
33" BFG m/t
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests