Page 1 of 1

33's on a standard height 40?

Posted: Sun Jun 05, 2005 7:12 pm
by big bundy
My mate recently purchased a crappy old 40 and wants to come bush, he is trying to get away with not lifting it if he can.

he wants to run 33" muddies, but will they scrub the gaurds without any body lift and without doing a gaurd chop??

Posted: Sun Jun 05, 2005 7:30 pm
by DIRTY ROCK STAR
Im no expert but i would say yes! dependent on flex.
i have 35s and SPOA and i scrub at back.

Posted: Sun Jun 05, 2005 7:33 pm
by plowy
they will grab the lip on the front guards on full lock n twist up
and flair the rear guards out and catch the inner guard on the rear too

mine does it with a 2'' lift above standard

maybe bend up all the lips on the gaurds to reduce it if he is only gunna paddock bash it style

Posted: Sun Jun 05, 2005 7:46 pm
by DJ_Brown
yeah, i was gonna suggest the same thing :P

Posted: Sun Jun 05, 2005 7:48 pm
by big bundy
cheers guys

Posted: Sun Jun 05, 2005 9:31 pm
by 40 lover
yea i run 2 in susp lift with 33's, on road it never scrubs

off road... rarely... only on max flex it just hits the front guard

but overall.... im pretty pleased with how high it is and choice of tyres and all that.... i think its a good setup.

Posted: Mon Jun 06, 2005 4:22 pm
by 4sum4
I run 33x10.5`s and only just rubs on the front tie rod end and also on the pitman arm on full flex and thats with standard suspension.

Posted: Mon Jun 06, 2005 7:59 pm
by 45punkbus
i got a stock 45 with 33x12.5 micky t claws, not sure if they are factory same hight,

i only scrub steering stuff, and i get full flex from the shocks i got

cheers

Dean

Posted: Mon Jun 06, 2005 8:15 pm
by bad_religion_au
the troopy is a little taller stock

mine used to run 33's on stock suspension, trim the rear guards.

Posted: Mon Jun 06, 2005 8:33 pm
by ozlegacy
Im running 33 mudies on stock suspension on a bj42 (although springs are pretty flat) and only rub offroad

Posted: Tue Jun 07, 2005 11:36 am
by WICKED
i ran 34x11.5xr16 on a stanard hieght 40, no worry's if u dont mind a bit of scrubbing

Posted: Tue Jun 07, 2005 1:06 pm
by shorty_f0rty
i have a crap 2" susp lift and have cut about 10-20mm from my rear guards to reduce scrubbing...

I do get a tiny amount of rubbing when maxing out the articulation off-road with 33x10.5xr15 jt2's.

Image

i'm sure if you weren't doing anything off-road you'd have no issues without any lift..

Posted: Wed Jun 08, 2005 12:37 pm
by DIRTY ROCK STAR
WICKED,
ben when are you going to go back to the poor farmer and give him his gate back?? :finger: