Page 1 of 1
crown powersteer
Posted: Sun Jun 05, 2005 10:52 pm
by eddie
put a crown p/s box onto my fj40 (out front)
needing info on what i should do for steering slaft from cab to box
also what pitman arm to use as the crown one has a tayped pin on the end
Posted: Fri Jun 10, 2005 4:27 pm
by ORSM45
my mate has this setup.
used a 60 series colum, extended the shaft to required length.
cant tell you exactly. but think he used the tie rod end from the crown (or similar, not sure) into the drag link of the cruiser's.
Posted: Fri Jun 10, 2005 8:39 pm
by kiwipajero
some of the guys in my club have started using nissan terrano [pathfinder] powersteer boxes as the crown ones are getting to hard to get
Posted: Sun Jun 12, 2005 5:10 pm
by ToyTruck
this help
hj45 with complete 75 series power steering
I installed the 75 series steering column inside and extended the 75 series shaft to fit
I used the standard 75 series drag link too ( no mods needed )
Posted: Sun Jun 12, 2005 5:54 pm
by bad_religion_au
you wouldn't have a detailed writup on that powersteering setup would you?
Posted: Sun Jun 12, 2005 8:20 pm
by ToyTruck