Page 1 of 1
Drill and tap
Posted: Sun Nov 17, 2002 5:35 pm
by Cheezy4x4
I need a drill and tap size chart, eg: what size drill is needed for thread tap size, also would like the die sizes too.
Posted: Sun Nov 17, 2002 5:53 pm
by MKPatrolGuy
http://www.rightcoastcrawler.com/billaV ... sIndex.htm
Go to Drilling And Tapping 8) Doesn't have Dies though...
Posted: Mon Nov 18, 2002 12:14 am
by hophoar
Die sizes are equivelent to the thread size, ie: 10x1. 10mm diameter x 1mm pitch, metric is easy when you get into BSP and Whitworth things become harder.
Cheezey Needs a decent reamer chart ...
Posted: Mon Nov 18, 2002 6:28 am
by tjpete
Mark,
You can obtain one for free from any decent supplier of fasteners. The folks in this URL are the ones who supply me:
http://www.boltking.com.au/
Posted: Tue Nov 19, 2002 12:14 am
by duncan
Just go to a Blackwoods or other hardware store and ask for a zeus book it has every thing you need in a small flip top book only a couple of dollars all machineists have them