Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Polyair Bags or Heavier Springs

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 41
Joined: Thu Nov 27, 2003 12:58 pm
Location: Nth Beaches of Sydney

Polyair Bags or Heavier Springs

Post by SteveC »

I have just fitted new 2" higher springs all round. When loaded the Rangie sags in the rear by about 1-2 inches (25-50mm). Is it better to change to heavier springs or to add polyair bags to inflate when loaded? Does the heavier springs decrease wheel travel?

Thanks
RANge rOVER
Top
Posts: 2732
Joined: Fri May 28, 2004 11:50 pm
Location: Perth, WA

Post by stuee »

I have asked exactly the same thing.

http://www.outerlimits4x4.com/PHP_Modul ... highlight=

I still have not done anything yet as a 50mm lift looks very likely in the next few months but when I get it done I will ask for an extra set of hd springs for the rear which I will swap in and out for trips.

Cheers Stuee

edit* not exactly the same thing.... :D

When fully loaded the hd spring will act like a lighter duty spring which is not carrying a load so its like going back to normal but it will not flex as much unloaded as the spings you've got now
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 0 guests