Outer Limits 4x4 Board

when i got my fj45 cruiser i got new fibreglass guards with it. but the guards dont have nethin on them eg. no parker/indicator mounts, no hole for screws/bolts and on the outside edge of the guard where the flare go's there is no lip on it but there should be. wat do i do to get them fitable to the car once its done? can any1 give me and clues or wat, nethin at all

cheers

as for lights u can fit the 75 series style of indiactor/parker combo

flares there is a style that u screw to the outside of a guard and it folds over itself to cover the screws and give u a flare

as for a gaurd mounting posi u may have to get a orig guard to use to match up the hole unless someone else has gorne threw it

You have to use all the old mounts and things from the originals. Its a pain in the bum. Drill the holes for lights wherever you want. Its a bugger of a job to get it all lined up again nicley. Why put fibreglass on? Are the steel ones bent/rusted?

umm well one of the guards that came with it is fibreglass, its in ok condtion and has all holes drilled but the other one i through out cause it was farked oh and it was steel

up we gooo