Outer Limits 4x4 Board

i have aquired a Mauruni transfer case from a 1L zook, can i fit calmini 5:1's to this case or do i need a 1.3L transfer?

BTW does anyone have any gears for sale? Any reduction will do for the moment, rock hopper 4.1:1 etc
Chris

Does it have the 4wd light? if so i think you can put any 1.3 gears in it.

Theory is that any brand of gear reduction should fit into a Maruti or Series 2 SJ410 (8/83+) transfer case. Just remember that the high range ratio in a 1.0L (Hi @ 1.58:1, Lo @ 2.11) transfer case is equivalent to most brands of 4.1 gear set and low range is lower ratio than a 1.3L (Hi @ 1.409:1, 2.268:1)

A lot of the later model 1.0 Maruti stuff is very similar to Sierra 1.3 stuff, so it may be different outputs on transfer, different mounts ??? but I imagine internals be the same ???... just guessing tho.
I believe the series 3 hopper needs part of the 1.3 internals, and the 4:1 hopper needs a part off the 1.0 internals, but not sure on exact details.
more educated guess work
christover

Just remember that the high range ratio in a 1.0L (Hi @ 1.58:1, Lo @ 2.11) transfer case is equivalent to most brands of 4.1 gear set and low range is lower ratio than a 1.3L (Hi @ 1.409:1, 2.268:1)[/quote]

Found a typo, 1.0L low range ratio should be 2.511:1 NOT 2.11:1 (missed the 5). As pointed out any Sierra transfer case with a 4WD light switch you can put a gear reduction set into.

I have series 3 gears in a 95 maruty 1 litre case.