Slider steps?
Posted: Fri Jun 10, 2005 7:34 pm
Any suggestions as to where I can get some slider rails for my LWB GQ waggon. A plan or suggestions on how to DIY would also be nice. My lil bro is OK with a MIG
Page 1 of 1
Posted: Fri Jun 10, 2005 7:38 pm
see tech discussion. a thread in there now on sliders.
Posted: Fri Jun 10, 2005 7:48 pm
i am building mine out of tube at the moment.. if you can wait till monday i will get some pics up of mine fitted to my lwb gq for ya....
david.....
david.....
Posted: Fri Jun 10, 2005 8:47 pm
Heres a link to mine that i built
http://www.outerlimits4x4.com/PHP_Modul ... cs+sliders
And heres another set a made for a doods 80 series cruiser
http://www.outerlimits4x4.com/PHP_Modul ... es+sliders
Dan
http://www.outerlimits4x4.com/PHP_Modul ... cs+sliders
And heres another set a made for a doods 80 series cruiser
http://www.outerlimits4x4.com/PHP_Modul ... es+sliders
Dan
Posted: Mon Jun 13, 2005 10:44 pm
couple of pics of silver gqs i did for him this weekend....
Posted: Mon Jun 13, 2005 10:48 pm
one more of the sliders and one of the front bar... these have been set up to mount the brush bars to and the exo which i will be doin in the next week or so for him....will put up finished pics when done.....
also we had to use the existing mounts the previous owner of his car had left on there for the sliders.
. not ideal but made it all line up eventually.... 
the front bar has also been made to accomodate a winch and cradle at a later date
also we had to use the existing mounts the previous owner of his car had left on there for the sliders.
. not ideal but made it all line up eventually.... the front bar has also been made to accomodate a winch and cradle at a later date