Page 1 of 1
rear panhard rod
Posted: Fri Jun 10, 2005 8:59 pm
by matthewK
i was under the 4by just before and noticed that the panhard rod on the back where its bolts up to the axle housing is extremely lose over the rubbers, can you get new rubbers to make it tight again?
what are they worth
matthew
Posted: Fri Jun 10, 2005 9:20 pm
by tankekwee1972
This is from an email off another forum ages ago....
"55135-01J01 top (small hole)
55135-01J10 bottom (large hole)
Should fit front and rear 1990 on.
2000 on Rears may have different top rear bush
Some pre 1989 rears have a 2 piece rear bottom bush.
Cost from Nissan $16 each
Just wind in on the vice with some slippery stuff.
Bazzle --with new panhard bushes
Just to clarify what i have just discovered, after having a look at my stock
panhard bars complete with bushes,
now, both panhard require 2 bushes,
the diff mounted one, with large hole part# 55135-01J01
and the chassis mount with small hole part# 55135-01J10
as bazzle has said, these should do both panhards depending on the year as
stated above, nissan spare parts people know nothing.
"
Posted: Fri Jun 10, 2005 10:01 pm
by ozy1
indeed i believe that info is correct, gieves you something to do next week.......
Posted: Sat Jun 11, 2005 1:03 pm
by matthewK
yeah she's an 88 4.2
