Page 1 of 1
Cator plates
Posted: Mon Jun 13, 2005 11:09 pm
by crankycruiser
Wil 80 series castor plates fit a coil sprung bundy???
Posted: Wed Jun 15, 2005 9:37 am
by Hales231271
Don't know about the latter Bundy but I know early Bundy's
with the pin set up radius arms (GQ style)do not fit.
I are using 80 series arms to put a bundy front diff into my Hilux so
if required I can use caster correction bushes.
Cheers
Dazza
Posted: Wed Jun 15, 2005 2:05 pm
by dumbdunce
Hales231271 wrote:Don't know about the latter Bundy but I know early Bundy's
with the pin set up radius arms (GQ style)do not fit.
I are using 80 series arms to put a bundy front diff into my Hilux so
if required I can use caster correction bushes.
Cheers
Dazza
the later ones (1990-) have the same setup as 80's so will fit, but yeah the eariler ones, no good.
it's not rocket science to build a set of castor plates, and you can use 80 series castor bushes in the earlier ones if you leave the outer ring of the factory bush in the leading arms (burn out the rubber with the oxy).
Posted: Wed Jun 15, 2005 5:05 pm
by crankycruiser
I'm askin cause i have a set to sell a bloke I know wants a set for his bundy... (i havent got to look at the car otherwise i would know if they fit)..
How much do u reckon these are worth to sell???
Posted: Wed Jun 15, 2005 5:26 pm
by dumbdunce
crankycruiser wrote:I'm askin cause i have a set to sell a bloke I know wants a set for his bundy... (i havent got to look at the car otherwise i would know if they fit)..
How much do u reckon these are worth to sell???
$100ish? new ones are $200+ (victim/retail price)