Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Maybe there should be a thread on rock sliders since the front bar examples thread has changed to rock sliders!
I'm about to make some, so ideas, plans, styles would be great!
You do not have the required permissions to view the files attached to this post.
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
I wouldnt mount mine to the body after seeing what they did to bazooked's 4x4 when he put the side onto some rocks. It pushed the slider in and dented in under his door pretty bad, would have been worse though if he didnt have them.
I remeber I used to have (detailed) pics for the Shrockworks sliders (the one suz_rolly posted) and I posted them up on here somewhere but I can't find them. The pics showed how the sliders were made and it didn't look too hard to make.
having that piece of angle up there brings a bit of concern regarding rust etc.
might pay to seal those babies up witha tube o goop before bolting them on.
what do ppl do about that usually? nothing? sikaflex?
surely the mud and shit gets in and eats your sills..
bodies r easy to find if your falls off lol!
.