Page 1 of 1
knocking noise when turning right
Posted: Wed Jun 15, 2005 12:13 am
by RED-GU
Hey all
l was wondering if anyone had any ideas what could cause a knocking noise in my GU 4.5 parol when turning right? It has a 2 inch suspension kit which are kings springs and Koni's and rolling on Procomp x terrains????
Please help
Posted: Wed Jun 15, 2005 6:18 am
by mickyd555
is it only at full lock?
Posted: Wed Jun 15, 2005 5:53 pm
by InSanE
check your sway bar link bolts they have a tendancy to come loose on GU's
Posted: Wed Jun 15, 2005 7:03 pm
by RED-GU
micky its happens when turning corners at a speed of 50kms!!!
Insane l dont have front sway bars on!!!!!!
Posted: Wed Jun 15, 2005 10:35 pm
by mickyd555
RED-GU wrote:micky its happens when turning corners at a speed of 50kms!!!
Insane l dont have front sway bars on!!!!!!
slow down around corners, unless your driving a race car........................
Posted: Wed Jun 15, 2005 10:39 pm
by ozy1
could it just be coincidence and a spring moving on its seat? what size tyres are you running?
also, radius arms bolts, are they all tight, i know my old mans GU has a click if one of the radius arm bolts come loose
Posted: Wed Jun 15, 2005 10:41 pm
by toughnut
Check where the radius arms mount into the chassis. I just popped the ring out of the chassis on the weekend and had a look at the drivers side to find it was cracked as well making a sort of clicking/clunking noise. And before people say it was the 3rd's radius arms it was happening before I put them in. The factory welds on the chassis are crap. I've found bubbling in the welds all over the chassis. Can't believe it would come out of the factory like that.