Outer Limits 4x4 Board

Well ive allbut completed the rear bar for the lowrider ................

And as the way ive built it i couldnt use the original tow point (centre hook) so im now gunna run two points 1 either side ......Dont have the room for a buy style tow hook (bolt on ) as ive shortened the chassis unless i redesign the bar mount point ( dont want to do that)

So im cosiderin using some 15mm m/s plate that hypo has offered me and cut and shape into a reciever kind of setup for a shackle that will protrude through between the upper and lower tubes on the bar sides...........i will then weld aswell as use 1 of the mountin bolts to locate this plate .........

I will allow 20mm around the hole for the shackle pin

wat are your thoughts will this be strong enough .......sorry no pics hope yooos understand

as long as its STRONG dude as i know how u drive and i knooow that ill be tow u out on these points a fair bit so if they come off and hit my rig look out