Page 1 of 1
diff centres
Posted: Thu Jun 23, 2005 2:57 pm
by DVS-4x4
will an '82 rear hilux diff center be the same as an '85
are they the same ratio
ineed to know also if i could use the rear center in the front diff
Posted: Thu Jun 23, 2005 5:44 pm
by Screwy
the centres will bolt in between the 82 and 85 models....
to check the ratio just put it in, turn the wheel once and see how many times the spider gear on the centre turns.
also i do believe that front and rear centres are interchangeable.
screwy
Posted: Thu Jun 23, 2005 5:55 pm
by STUMPY
Screwy_ScrewBall wrote:
also i do believe that front and rear centres are interchangeable.
screwy
yes they are
Posted: Thu Jun 23, 2005 8:33 pm
by Tooheys
isnt the ratio stamped on the crownwheel?? Im pretty sure ive seen hilux centres with the ratio stamped on the outer edge of the crownwheel
Posted: Thu Jun 23, 2005 9:26 pm
by bubs
Tooheys wrote:isnt the ratio stamped on the crownwheel?? Im pretty sure ive seen hilux centres with the ratio stamped on the outer edge of the crownwheel
yes it is
clean the crown wheel on the outer edge you will find a circle around a stamped to digit number
so far i have seen on different hilux diffs
41=4.11
43=4.33
46=4.55
48=4.88
Easy
Posted: Thu Jun 23, 2005 10:48 pm
by hiluxv8
bubs wrote:Tooheys wrote:isnt the ratio stamped on the crownwheel?? Im pretty sure ive seen hilux centres with the ratio stamped on the outer edge of the crownwheel
yes it is
clean the crown wheel on the outer edge you will find a circle around a stamped to digit number
so far i have seen on different hilux diffs
41=4.11
43=4.33
46=4.55
48=4.88
Easy
Yeah this is on the late 80's and 90's crownwheels,its the number of teeth on the crownwheel and 10 on the pinion. The early ones are a bit different(just the number of teeth if you know what i mean.Just count the number of teeth on the crownwheel and divide that by the number of teeth on the pinion and you have your ratio.
Posted: Fri Jun 24, 2005 7:44 am
by madmont
the ones I have the number of teeth on the crownwheel and pinion is stamped on the crownwheel
????????????
Posted: Fri Jun 24, 2005 2:06 pm
by DVS-4x4
does anyone no wat model hilux this is out of
Posted: Fri Jun 24, 2005 2:26 pm
by madmont
looks like landcruiser to me
maybe
Posted: Fri Jun 24, 2005 5:19 pm
by DVS-4x4
it could be a cruiser diff i dont no it came out of a hilux that i bought 4 parts but if anyone has any info i would apprieciate it. cheers
Posted: Fri Jun 24, 2005 6:03 pm
by hiluxv8
madmont wrote:looks like landcruiser to me
I think cruiser discs were all ventilated, thats a solid disc so probably anywhere from 79 till whenever they put vented discs in hiluxes.
Posted: Fri Jun 24, 2005 6:13 pm
by BOGAN V8
bubs wrote:Tooheys wrote:isnt the ratio stamped on the crownwheel?? Im pretty sure ive seen hilux centres with the ratio stamped on the outer edge of the crownwheel
yes it is
clean the crown wheel on the outer edge you will find a circle around a stamped to digit number
so far i have seen on different hilux diffs
41=4.11
43=4.33
46=4.55
48=4.88
Easy
Put one in the luxs the other nite which had 8x 39 stamped on the crown wheel which is a 4.88
Posted: Fri Jun 24, 2005 6:16 pm
by STUMPY
BOGAN wrote:bubs wrote:Tooheys wrote:isnt the ratio stamped on the crownwheel?? Im pretty sure ive seen hilux centres with the ratio stamped on the outer edge of the crownwheel
yes it is
clean the crown wheel on the outer edge you will find a circle around a stamped to digit number
so far i have seen on different hilux diffs
41=4.11
43=4.33
46=4.55
48=4.88
Easy
Put one in the luxs the other nite which had 8x 39 stamped on the crown wheel which is a 4.88
same here bogan
all the diffs i've put in have had 8x39 etc, not 41 or 43
Posted: Fri Jun 24, 2005 9:52 pm
by bubs
hmm interesting, i have definatelt seen the above, on the outer edge of the crown wheel
Posted: Sat Jun 25, 2005 12:23 am
by beefa125
Check out the casing and look fo the numbers
Posted: Sat Jun 25, 2005 1:02 pm
by benhl
hiluxv8 wrote:Just count the number of teeth on the crownwheel and divide that by the number of teeth on the pinion and you have your ratio.
Exactly - too easy
Posted: Sat Jun 25, 2005 5:47 pm
by RUFF
madmont wrote:looks like landcruiser to me
Its not Cruiser as the axle housing is SOA Its defianatly first generation Hilux.
Posted: Sat Jun 25, 2005 5:52 pm
by RUFF
bubs wrote:
yes it is
clean the crown wheel on the outer edge you will find a circle around a stamped to digit number
so far i have seen on different hilux diffs
41=4.11
43=4.33
46=4.55
48=4.88
Easy
Close but it is actually Stamped as 4.1,4.3,4.5,4.8 These are all later model Hilux Diffs.
The early ones will have the Crown and Pinion Teeth Counts stamped on them as Bogan Suggested.
Some dont have anything stamped on them at all so you just count the Crown Wheel teeth and Devide it by the Pinion Teeth.
As that is an early Hilux housing as long as its never been changed it will have 4.88 gears fitted.