hilux gear box ????
Posted: Tue Jun 28, 2005 3:52 pm
is it possible to bolt a hilux gear box up to a 2f motor
Page 1 of 1
Posted: Wed Jun 29, 2005 8:22 am
not really. what exactly are you trying to achieve? 2F in a hilux? gearbox swap in a 40 series?
Posted: Wed Jun 29, 2005 1:24 pm
putting the box in a 40
Posted: Wed Jun 29, 2005 10:21 pm
it's a no for lots of reasons. To start with if it's a G52 gearbox, it's just not strong enough for a big 6 cylinder motor. the rear output on the hilux transfer is centrered; the rear diff on a 40 is offset and the rear tailshaft is quite short; the uni joint angles would be horrendous. the input shaft spline, length and spigot diameter are all wrong. also not likely to be a bellhousing to mate them up, and a 2F bellhousing won't even go close to bolting to the front of a g52. It's about as close to impossible as you can get really...hypo lux wrote:putting the box in a 40
a H55F with transfer can be picked up for under $400, or a 4 speed with transfer often sells for under $200, so shop around, you can get a good gearbox for a good price.
hope that helps!
cheers
Brian
Posted: Thu Jun 30, 2005 7:41 am
did,nt think so it was just a thought thanks heaps for your help 