Page 1 of 1
3.5 HARMONIC BALANCER
Posted: Tue Jun 28, 2005 5:46 pm
by Loanrangie
Come on . some one in Mel's gotta have a spare 3.5 with parts to spare lying around.
http://www.outerlimits4x4.com/PHP_Modul ... hp?t=47994
Posted: Tue Jun 28, 2005 8:19 pm
by Philip A
Just be careful to specify whether you have power steer and aircon as the number of pulleys changes. But i think you can mix and match if your pulleys are OK, not sure though never really looked.
Reagrds Philip A
Posted: Tue Jun 28, 2005 8:46 pm
by Loanrangie
The pulleys can be removed so if they are different , i will just swap the pulleys over. Keyway on mine is flogged out, discovered that even when the bolt is tightened it could still be twisted side to side - before fitting the replacement i will machine a few mm of the end of the bolt. Its off my 85' hicomp 3.5 rangie so all would have p/s and most with a/c.
Posted: Sun Jul 03, 2005 8:39 pm
by Loanrangie
Picked one up yesterday, pulled mine off and the keyway had enlarged to about 13-14 mm! Even before i undid it i could rotate it side to side and it was flopping all over the place. Put a 4mm washer on so now it tightens correctly.
I got some pm's and replies to my wanted adds with prices from $100 - $650 - hhm, guess which one i took.