Page 1 of 1
OEM manual hubs
Posted: Wed Jun 29, 2005 2:47 pm
by hongkonger
hi,
great forum.
Any views on OEM manual locking hub (part number MB 886389)
There is a limited choice available here in Hong Kong, the other choice is chome finish superwinch but AUS $ 168 more expensive.
cheers,
Posted: Wed Jun 29, 2005 8:39 pm
by Bitsamissin
Yep go the Aisin hubs for sure as they are stronger.
All outer splines on the axles are all the same for 4x4 Mitsu's.
The Superwinch and AVM ones have those dread hex bolts and can strip very easily.
Posted: Fri Jul 29, 2005 1:03 pm
by cj
Just wondering if anybody knows, are the Aisin hubs for Mitsubishi's are identical to the Toyota and Suzuki ones apart from the inner hub spline? In other words if the inner hub splines were swapped they would be interchangeable like the Toyota and Suzuki ones are.
Posted: Fri Jul 29, 2005 6:20 pm
by hongkonger
bits,
thanks for the input. Need to shop
cj,
from web search I found that some parts of Aisin are interchangable,
here is the link:
http://www.4x4wire.com/mitsubishi/tech/aisin_hubs/
Posted: Fri Jul 29, 2005 8:36 pm
by cj
Hongkonger, thanks for that, it was the answer I was looking for.