Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

37" Procomp X Terrains

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 178
Joined: Mon Jun 02, 2003 3:21 pm
Location: Bayswater, VIC

Contact:
Contact Aus4wd

37" Procomp X Terrains

Post by Aus4wd »

Check these out, just arrived to shore last week and here one is compared to a 35" Xterrain, both tyres off rims!

These are being fitted to a SWB Mav with 3" body lift and 4" springs, the guards will be needed to be cut first.

Will post picks next week once they are fitted to the car.
Australian 4WD Specialist
www.aus4wdracing.com.au/forum
Top
Posts: 5457
Joined: Sun Oct 27, 2002 9:49 am
Location: Sydney

Post by Shorty40 »

What is the tyre width and what size rim (15 or 16") ?

Availabilty ???

And of course $$$ ?
Last edited by Shorty40 on Fri Jun 13, 2003 6:01 pm, edited 3 times in total.
Top
Posts: 384
Joined: Sun Oct 20, 2002 8:26 pm
Location: Springfield/ QLD

Contact:
Contact CJer

Post by CJer »

What width are they ???
Top
Posts: 384
Joined: Sun Oct 20, 2002 8:26 pm
Location: Springfield/ QLD

Contact:
Contact CJer

Post by CJer »

Bloody shorty ya beat me to it :)
Top
Posts: 5457
Joined: Sun Oct 27, 2002 9:49 am
Location: Sydney

Post by Shorty40 »

CJer wrote:Bloody shorty ya beat me to it :)


I must be keener for 37s than you :D
Top
Posts: 178
Joined: Mon Jun 02, 2003 3:21 pm
Location: Bayswater, VIC

Contact:
Contact Aus4wd

Post by Aus4wd »

37x13.5/16 can go on 8 or 10" rim

They do come in 15", but not in the country yet.

Currently only 12 in the country, more not due till end of July.

These tyres retail for $650 each, but PM me if you want to talk turkey!
Last edited by Aus4wd on Sat Jun 14, 2003 12:14 pm, edited 1 time in total.
Australian 4WD Specialist
www.aus4wdracing.com.au/forum
Top
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Contact:
Contact N*A*M

Post by N*A*M »

13.5" on an 8" rim? :D

how does the sidewall thickness compare to the 35"?
Top
Posts: 178
Joined: Mon Jun 02, 2003 3:21 pm
Location: Bayswater, VIC

Contact:
Contact Aus4wd

Post by Aus4wd »

We have one here on an 8" rim, would recommed 10". Not sure if on a 10" will fit in the guage for competition.

35" - Sidewall 2 ply poly/Tread 2 ply steel, 2 ply poly
37" - Sidewall 3 ply poly/Tread 1 ply nylon, 2 ply steel, 3 ply poly.

Also the side lugs are thicker on a 37"
Australian 4WD Specialist
www.aus4wdracing.com.au/forum
Top
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Contact:
Contact N*A*M

Post by N*A*M »

wow it sounds like the sidewall has been beefed up... but each ply could be thinner. they look hella sweet but hopefully the price will go down a little bit after time.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 4 guests