Page 1 of 1
disco body lift
Posted: Sat Jul 02, 2005 7:24 am
by Shy Industries
I have decided to turn my 97' disco into a super tourer with the first of the new mods being a 50mm body lift. The disco is a 97' tdi manual. I was wondering if anyone has any tips to make this task a little less daunting. I would appreciate any help thanks in advance.
Cheers Kaine.
Posted: Sat Jul 02, 2005 7:47 am
by Maggot4x4
I have heard rangie spares do an excellent kit with absolutely everything you need.
Posted: Sat Jul 02, 2005 7:50 am
by Daisy
dont rush it and research thorougly on what you need.
make some calls and chat away
the legality of certain types of body blocks (nylon , polyurethane (spell?), steel etc) to suit your state
the correct size bolts and make sure you zinc coat them as they'll rust themselves solid onto the nuts and will make it very difficult for removal in the future.
not a job to do alone... have a few mates handy..
TOM
Posted: Sat Jul 02, 2005 7:25 pm
by Davidh
I did the Rangie Spares body lift to my Disco, and as said, everything is included.
The only thing is the transfer case lever, but I just left it shorter, no big deal.
They even put in brackets to strenthen the body mount wings, which really should be used.
I think if you do a search someone posted a photo of the kit.