Page 1 of 1
cheap disc rotors on ebay - anyone run them?
Posted: Mon Jul 04, 2005 7:54 pm
by gurumon
like dis...
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... BIN_Stores
i need a set for the mq - anyone know if theyre any good? thoughts?
Posted: Mon Jul 04, 2005 8:08 pm
by familybus
yep i bought some off ebay for my gq bit over six months ago and theyve been great! but sorry dude cant remember if it was off that particular person!
Posted: Mon Jul 04, 2005 8:33 pm
by YankeeDave
just bought 2 GQ rotors for $56 each at ABS in Seaford
Posted: Mon Jul 04, 2005 9:36 pm
by stevelb1
I bought of the same guy about 3 months ago for my MK, I hve found them to be no problem at all, go for it you wont be disappointed.
Posted: Mon Jul 04, 2005 9:50 pm
by bogged
YankeeDave wrote:just bought 2 GQ rotors for $56 each at ABS in Seaford
yup, got mine from them too... wish I would have gone slotted though :(
Posted: Mon Jul 04, 2005 10:14 pm
by rhymus
I bought same deal 6 months ago. No problems, in fact, fixed my front end shake.
Posted: Mon Jul 04, 2005 10:37 pm
by gurumon
cool... thanks guys.
comforting to know im not a guinea pig
Posted: Tue Jul 05, 2005 1:13 am
by turps
bogged wrote:YankeeDave wrote:just bought 2 GQ rotors for $56 each at ABS in Seaford
yup, got mine from them too... wish I would have gone slotted though :(
I just ordered some slotted DBA discs today approx $80 bucks each.
Posted: Tue Jul 05, 2005 8:24 am
by muzza_fattire
turps wrote:bogged wrote:YankeeDave wrote:just bought 2 GQ rotors for $56 each at ABS in Seaford
yup, got mine from them too... wish I would have gone slotted though :(
I just ordered some slotted DBA discs today approx $80 bucks each.
What is the DBA product code for these?
I have been thinking of getting some aswell...
Posted: Tue Jul 05, 2005 9:49 am
by bazzle
muzza_fattire wrote:turps wrote:bogged wrote:YankeeDave wrote:just bought 2 GQ rotors for $56 each at ABS in Seaford
yup, got mine from them too... wish I would have gone slotted though :(
I just ordered some slotted DBA discs today approx $80 bucks each.
What is the DBA product code for these?
I have been thinking of getting some aswell...
http://www.dba.com.au/default.asp
Bazzle
Posted: Tue Jul 05, 2005 1:14 pm
by turps
Muzza,
I just went to the Brake shop and asked for slotted rotors for my model Patrol. So they maynot be DBA, only just thought of that after the shop rang to say they where in. But they did have DBA posters around the shop.
So are there other disc manufactures in aus. As I can only think of DBA?
Posted: Tue Jul 05, 2005 1:51 pm
by muzza_fattire
bazzle wrote:muzza_fattire wrote:turps wrote:bogged wrote:YankeeDave wrote:just bought 2 GQ rotors for $56 each at ABS in Seaford
yup, got mine from them too... wish I would have gone slotted though :(
I just ordered some slotted DBA discs today approx $80 bucks each.
What is the DBA product code for these?
I have been thinking of getting some aswell...
http://www.dba.com.au/default.asp
Bazzle
Fine! I will do my own work - You are sooo lazy Bazzle
From the last page of the Nissan PDF...
http://www.dba.com.au/nissan_2005.pdf
MQ 160, Classic 160 (1/81-12/87)
GQ Y60 non EFI (1988-on)
Safari X60
Front rotors: CODE=329
GQ Y60 EFI TB42E (2/92-on)
Front rotors: CODE=623
GQ Y60 All (1988-on)
Rear Rotors: CODE=622
These are all slotted+vented.
GU are there aswell
Posted: Tue Jul 05, 2005 2:48 pm
by bogged
muzza_fattire wrote:bazzle wrote:muzza_fattire wrote:turps wrote:bogged wrote:
yup, got mine from them too... wish I would have gone slotted though :(
I just ordered some slotted DBA discs today approx $80 bucks each.
What is the DBA product code for these?
I have been thinking of getting some aswell...
http://www.dba.com.au/default.asp
Bazzle
Fine! I will do my own work - You are sooo lazy Bazzle
From the last page of the Nissan PDF...
http://www.dba.com.au/nissan_2005.pdf
MQ 160, Classic 160 (1/81-12/87)
GQ Y60 non EFI (1988-on)
Safari X60
Front rotors: CODE=329
GQ Y60 EFI TB42E (2/92-on)
Front rotors: CODE=623
GQ Y60 All (1988-on)
Rear Rotors: CODE=622
These are all slotted+vented.
GU are there aswell
You dont want the ones with holes in em..
Posted: Tue Jul 05, 2005 2:54 pm
by bazzle
Vented is the gap between the inner and outer not the drilled holes.
Bazzle
Posted: Tue Jul 05, 2005 3:52 pm
by muzza_fattire
bazzle wrote:Vented is the gap between the inner and outer not the drilled holes.
Bazzle
The ones with holes are called 'cross-drilled'...
Posted: Tue Jul 05, 2005 5:45 pm
by turps
OK picked up my slotted discs today. They are actually RDA brand and they cost me $135 for the pair. The slots in them arnt as deep as I thought they would be. But we will see how well they go.
As for pads I just got what ever they had in the shop.And I forgoten what brand they are but they only cost me $40.
So will fit tommorow and see how they go. Just gotta find my gregorys book and see how to change them now.