IFS hubs on 60s front diff
Posted: Tue Jul 05, 2005 4:57 pm
do the 60s have the same hub as the hilux or can the hilux hub bolt up. looking at putting ifs hubs and making a spacer for the rotor 
Outer Limits 4x4 Board
Aussie Hardcore Wheelers
https://outerlimits4x4.com.au/
IFS hubs on 60s front diff
Page 1 of 1
Posted: Thu Jul 07, 2005 4:32 pm
tt
Posted: Thu Jul 07, 2005 4:53 pm
same if solid diffs
Posted: Thu Jul 07, 2005 7:31 pm
Dunno if this is relevent or not buut I have Hilux hubs on my 80
Posted: Fri Jul 08, 2005 1:24 am
Yes, it will fit.
Spacers are available in the US if you don't feel like making your own:
(picture shows IFS hubs on a RFS Hilux, but it's the same principle for a 60 series)
Here is a picture of a guy doing the IFS hub conversion without using rotor spacers (a bit dodgy in my opinion):
Dave
Spacers are available in the US if you don't feel like making your own:
(picture shows IFS hubs on a RFS Hilux, but it's the same principle for a 60 series)
Here is a picture of a guy doing the IFS hub conversion without using rotor spacers (a bit dodgy in my opinion):
Dave
Posted: Fri Jul 08, 2005 8:49 am
Spacers are also available in Aus frombeanz2 wrote:
Spacers are available in the US if you don't feel like making your own
www.abt4x4.com
or
www.offroadindustries.com
Not sure if the brakes are the same though (but I havnt played with cruiser stuff much).
Paul.