Outer Limits 4x4 Board

Anyone have a good design for a fridge slide for a 80 litre Waeco Thanks

Dunno if this helps?

A dude on ebay is selling HD 100kg rated runners for $50 at the moment.

http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 36594&rd=1

They're not big enough for me, but he says he;ll do 900mm long buggers for about $140 plus shipping.

thanks Boopa.i would need the 900mm ones aswell ,do u have a phone num 4 old mate selling them .

I would use heavier runners than that for an 80Ltr fridge.
100kg runners are fine for 5oLtr fridges.

I would suggest 150kg runners would last longer.

Remember, the runners are designed and rated for drawers at home not in the back of a 4by that would be subjected to corrugations and dust etc.

might have to fab up some using angle iron and bearings then..u think

Yep, sealed bearings would work great and be heaps cheaper
The ones I use are Chinees made sealed bearing with a 22mm diameter to suit an 8mm bolt. Cost around $1.50 each if you buy enough of them.

thanks GU. ill do that....