Outer Limits 4x4 Board

hey i was wondering if anyone knows of or has done a power steering convertion on a H motor (not 2H).

i was just wondering where i could mount a powersteering pump to the H motor?

cheers

Dean

Hi Punk
I have recently asked the same question in other forums.
didnt really get much help,but a guy on IH8mud was gunna post up some pics of what he did-havent seem them yet.
But I figured out something myself,probably not the best idea but its the only idea i had.
All I did was remove the fuel filter and welded a steel plate to the filter mount to sit the pump on.I wasnt planning on having a heater in my truck so I just scrapped the plumbing from the water pump housing(long hex bolt thing).All I have to do now is mount an adjuster bracket and add another pulley to the water pump(dont know if its good to drive the p/s pump off the water pump but it will have to do for now.It will have good belt wrap though.
I will post a pic of what I have done so far(easier to explain with pics) it might give you some better ideas which you can pass on to me.
Will be along time before I can test my setup out as I have the body off for panel beating and theres lots of expensive stuff I want.
I will take a pic tomorrow

Cheers
Tez

hey maye. very common question.

i did a search for you and found this link:

http://www.outerlimits4x4.com/PHP_Modul ... r+steering


now this one looks quite in depth and is probly the best one to do. pretty simple, very effective.
i'll be starting mine soon ( the same conversion just on a B motor)

should answer all ya question's if not ask them here.

BLB[/b]

this might help too.

http://www.outerlimits4x4.com/PHP_Modul ... hp?t=46356

ohh and a 2H will be the same as H, the harmonice balance is the only external differance (i think, correct me if i'm wrong)

BLB

i'm not so sure on that, the H and 2H are very different i've been told, and the 2H's came with power steering in some instances so that their is provision for that

Thats where I wanted to mount my pump but unless I drilled into the block or done a real maori job was unable to.
Someone must have done this conversion in an H?

Tez

Just went to put up a pic but too hard to do.
Maybe I can mail it to ya.

Tez

Just went to put up a pic but too hard to do.
Maybe I can mail it to ya.

Tez

Dean are going to fit a 60 box or OEM 40 box


BJ


MIGHT BE SELLING MY STEERING BOX

thanks all for your help,

thanks wicked for the search, i did a search for a h powersteering convertion but nothing came up that i could find,

cheers

Dean.