Outer Limits 4x4 Board

any one know of a good cheap exhaust place around castle hill / hornsby? I want to get mine done ASAP and dont like the price of $850.00 for a straight through system from the dump pipe with one resanator

make it yourself, cant get cheeper than that

Tiny wrote:any one know of a good cheap exhaust place around castle hill / hornsby? I want to get mine done ASAP and dont like the price of $850.00 for a straight through system from the dump pipe with one resanator

i know a great place that does them at a good price, however it is at sefton (regents park area) about 30mins from hornsby

9645 4554.

they are really good and have got a couple of comp rigs in there right now for exhausts...

Luke

Tiny wrote:any one know of a good cheap exhaust place around castle hill / hornsby? I want to get mine done ASAP and dont like the price of $850.00 for a straight through system from the dump pipe with one resanator

Quick-fit in sailsbury road hornsby do alot of exhaust work for Mannell Engineering, also alot of performance work for the rally car/performance scene, years ago i had a 2" system installed by them onto my 20v powered corrolla, was a good setup. They also do exhaust work for our fleet at work.

I would call them if your a hornsby local.

thanks guys will try them

eddie wrote:make it yourself, cant get cheeper than that

I agree! man if you can make roll cages you have all the skillz and tools required to make an exhaust.

dumbdunce wrote:

eddie wrote:make it yourself, cant get cheeper than that

I agree! man if you can make roll cages you have all the skillz and tools required to make an exhaust.

dont have a bender with the correct die available other wise yeah I would go for it

buy teh straight pipe, and buy a few doughnuts of the same diameter, cut and WELD
JEs

Tiny wrote:

dumbdunce wrote:

eddie wrote:make it yourself, cant get cheeper than that

I agree! man if you can make roll cages you have all the skillz and tools required to make an exhaust.

dont have a bender with the correct die available other wise yeah I would go for it

heh. started making buggy frames yet? I've having trouble selling my rolled 80, maybe god wants me to build a buggy...

jessie928 wrote:buy teh straight pipe, and buy a few doughnuts of the same diameter, cut and WELD
JEs

would the exhaust place have "donuts"? or just ask at the local steel place? I presume these are just 360deg bends of the given pipe size? it is a pretty simple syst I am after, flex pipe from the bell bousing mount then out the side, may not go the resonator even as I understand the turbo quietens it down enough

dumbdunce wrote:

Tiny wrote:

dumbdunce wrote:

eddie wrote:make it yourself, cant get cheeper than that

I agree! man if you can make roll cages you have all the skillz and tools required to make an exhaust.

dont have a bender with the correct die available other wise yeah I would go for it

heh. started making buggy frames yet? I've having trouble selling my rolled 80, maybe god wants me to build a buggy...

come around nytime and we will start

jessie928 wrote:buy teh straight pipe, and buy a few doughnuts of the same diameter, cut and WELD
JEs

mmmm donuts... I might have to take a quick drive down to Krispy Kreme...

dumbdunce wrote:

jessie928 wrote:buy teh straight pipe, and buy a few doughnuts of the same diameter, cut and WELD
JEs

mmmm donuts... I might have to take a quick drive down to Krispy Kreme...

ahhhrg I HATE krispy Cremes, they are WAY TO SWEET and dont hijack my thread you bastard

<<##### CAUTION< THREADJACKING IN PROGRESS####>>

yeah crispy creme is YUM
would you like fries with that?

Jes

Tiny wrote:

dumbdunce wrote:

jessie928 wrote:buy teh straight pipe, and buy a few doughnuts of the same diameter, cut and WELD
JEs

mmmm donuts... I might have to take a quick drive down to Krispy Kreme...

ahhhrg I HATE krispy Cremes, they are WAY TO SWEET and dont hijack my thread you bastard

no way they are they YUM! I have one of those findraising cards so I get a free dozen when I buy a dozen - I can usually get through almost the whole free dozen on the drive between eastern creek and home (about 15 mins).

anyway back to exhausts I have some bits of 80 series exhaust and miscellaneous tube lying around, bring it around and I'll make a mess of it for $fitty

dumbdunce wrote:

Tiny wrote:

dumbdunce wrote:

jessie928 wrote:buy teh straight pipe, and buy a few doughnuts of the same diameter, cut and WELD
JEs

mmmm donuts... I might have to take a quick drive down to Krispy Kreme...

ahhhrg I HATE krispy Cremes, they are WAY TO SWEET and dont hijack my thread you bastard

no way they are they YUM! I have one of those findraising cards so I get a free dozen when I buy a dozen - I can usually get through almost the whole free dozen on the drive between eastern creek and home (about 15 mins).

anyway back to exhausts I have some bits of 80 series exhaust and miscellaneous tube lying around, bring it around and I'll make a mess of it for $fitty

you home this arvo? if so PM me your addres and I will ca\ome nd have a look (ps instruction to as I dont have the UBD with me)

Tiny wrote:

dumbdunce wrote:

Tiny wrote:

dumbdunce wrote:

jessie928 wrote:buy teh straight pipe, and buy a few doughnuts of the same diameter, cut and WELD
JEs

mmmm donuts... I might have to take a quick drive down to Krispy Kreme...

ahhhrg I HATE krispy Cremes, they are WAY TO SWEET and dont hijack my thread you bastard

no way they are they YUM! I have one of those findraising cards so I get a free dozen when I buy a dozen - I can usually get through almost the whole free dozen on the drive between eastern creek and home (about 15 mins).

anyway back to exhausts I have some bits of 80 series exhaust and miscellaneous tube lying around, bring it around and I'll make a mess of it for $fitty

you home this arvo? if so PM me your addres and I will ca\ome nd have a look (ps instruction to as I dont have the UBD with me)

dude you seriously don't want me working on your exhaust. to say I am heavy handed with the mig is a serious understatement.

dumbdunce wrote:

Tiny wrote:

dumbdunce wrote:

Tiny wrote:

dumbdunce wrote: mmmm donuts... I might have to take a quick drive down to Krispy Kreme...

ahhhrg I HATE krispy Cremes, they are WAY TO SWEET and dont hijack my thread you bastard

no way they are they YUM! I have one of those findraising cards so I get a free dozen when I buy a dozen - I can usually get through almost the whole free dozen on the drive between eastern creek and home (about 15 mins).

anyway back to exhausts I have some bits of 80 series exhaust and miscellaneous tube lying around, bring it around and I'll make a mess of it for $fitty

you home this arvo? if so PM me your addres and I will ca\ome nd have a look (ps instruction to as I dont have the UBD with me)

dude you seriously don't want me working on your exhaust. to say I am heavy handed with the mig is a serious understatement.

though you ment ya got some tube and so forth you wanted to get rid of, doesn't matter what it looks like any way, its the comp rig and it doesn't need to be pretty, f***ed up the cage install and its off scew and the drivers dash is a little butchered....I gat otheres to install delicate things like that on other peples rigs, dash's are to easy to f*** up.

what sise pipe is it?

Tiny wrote:

dumbdunce wrote:

Tiny wrote:

dumbdunce wrote:

Tiny wrote: ahhhrg I HATE krispy Cremes, they are WAY TO SWEET and dont hijack my thread you bastard

no way they are they YUM! I have one of those findraising cards so I get a free dozen when I buy a dozen - I can usually get through almost the whole free dozen on the drive between eastern creek and home (about 15 mins).

anyway back to exhausts I have some bits of 80 series exhaust and miscellaneous tube lying around, bring it around and I'll make a mess of it for $fitty

you home this arvo? if so PM me your addres and I will ca\ome nd have a look (ps instruction to as I dont have the UBD with me)

dude you seriously don't want me working on your exhaust. to say I am heavy handed with the mig is a serious understatement.

though you ment ya got some tube and so forth you wanted to get rid of, doesn't matter what it looks like any way, its the comp rig and it doesn't need to be pretty, f***ed up the cage install and its off scew and the drivers dash is a little butchered....I gat otheres to install delicate things like that on other peples rigs, dash's are to easy to f*** up.

what sise pipe is it?

2.5", probably a few bits of other sizes. ugly I can do. does it need a whole system or just a patch up? tomorrow morning is better, have other jobs this arvo I've been putting off all day

I made my own, bought 3" mandrel bends from a truck parts supplier for $18 ea and tubing from a local steel mob. All up the sytem cost $480 including dump pipe, SS flex pipe and resonator.

If you have the equipment and time go for it.

I use an exhaust guy around the corner from me Rowville Exhausts, his work is top notch and his prices are good.

dumbdunce wrote:

Tiny wrote:

dumbdunce wrote:

Tiny wrote:

dumbdunce wrote: no way they are they YUM! I have one of those findraising cards so I get a free dozen when I buy a dozen - I can usually get through almost the whole free dozen on the drive between eastern creek and home (about 15 mins).

anyway back to exhausts I have some bits of 80 series exhaust and miscellaneous tube lying around, bring it around and I'll make a mess of it for $fitty

you home this arvo? if so PM me your addres and I will ca\ome nd have a look (ps instruction to as I dont have the UBD with me)

dude you seriously don't want me working on your exhaust. to say I am heavy handed with the mig is a serious understatement.

though you ment ya got some tube and so forth you wanted to get rid of, doesn't matter what it looks like any way, its the comp rig and it doesn't need to be pretty, f***ed up the cage install and its off scew and the drivers dash is a little butchered....I gat otheres to install delicate things like that on other peples rigs, dash's are to easy to f*** up.

what sise pipe is it?

2.5", probably a few bits of other sizes. ugly I can do. does it need a whole system or just a patch up? tomorrow morning is better, have other jobs this arvo I've been putting off all day

off the botom of the dump pipe, and out the side, dont want you to do it this arvo, just want to look at the size of the pipe, 5 minutes, and I will bring a beer

Tiny wrote:

dumbdunce wrote:

Tiny wrote:

dumbdunce wrote:

Tiny wrote: you home this arvo? if so PM me your addres and I will ca\ome nd have a look (ps instruction to as I dont have the UBD with me)

dude you seriously don't want me working on your exhaust. to say I am heavy handed with the mig is a serious understatement.

though you ment ya got some tube and so forth you wanted to get rid of, doesn't matter what it looks like any way, its the comp rig and it doesn't need to be pretty, f***ed up the cage install and its off scew and the drivers dash is a little butchered....I gat otheres to install delicate things like that on other peples rigs, dash's are to easy to f*** up.

what sise pipe is it?

2.5", probably a few bits of other sizes. ugly I can do. does it need a whole system or just a patch up? tomorrow morning is better, have other jobs this arvo I've been putting off all day

off the botom of the dump pipe, and out the side, dont want you to do it this arvo, just want to look at the size of the pipe, 5 minutes, and I will bring a beer

sold! (will have to be before about 6, got people coming over - ok?)

pming address

dumbdunce wrote:

Tiny wrote:

dumbdunce wrote:

Tiny wrote:

dumbdunce wrote: dude you seriously don't want me working on your exhaust. to say I am heavy handed with the mig is a serious understatement.

though you ment ya got some tube and so forth you wanted to get rid of, doesn't matter what it looks like any way, its the comp rig and it doesn't need to be pretty, f***ed up the cage install and its off scew and the drivers dash is a little butchered....I gat otheres to install delicate things like that on other peples rigs, dash's are to easy to f*** up.

what sise pipe is it?

2.5", probably a few bits of other sizes. ugly I can do. does it need a whole system or just a patch up? tomorrow morning is better, have other jobs this arvo I've been putting off all day

off the botom of the dump pipe, and out the side, dont want you to do it this arvo, just want to look at the size of the pipe, 5 minutes, and I will bring a beer

sold! (will have to be before about 6, got people coming over - ok?)

pming address

prolly 530 by the time I get over there

Tiny wrote:

dumbdunce wrote:

Tiny wrote:

dumbdunce wrote:

Tiny wrote: though you ment ya got some tube and so forth you wanted to get rid of, doesn't matter what it looks like any way, its the comp rig and it doesn't need to be pretty, f***ed up the cage install and its off scew and the drivers dash is a little butchered....I gat otheres to install delicate things like that on other peples rigs, dash's are to easy to f*** up.

what sise pipe is it?

2.5", probably a few bits of other sizes. ugly I can do. does it need a whole system or just a patch up? tomorrow morning is better, have other jobs this arvo I've been putting off all day

off the botom of the dump pipe, and out the side, dont want you to do it this arvo, just want to look at the size of the pipe, 5 minutes, and I will bring a beer

sold! (will have to be before about 6, got people coming over - ok?)

pming address

prolly 530 by the time I get over there

no worries. I'll dig the bits out from under the house now while there's daylight.

dumbdunce wrote:

Tiny wrote:

dumbdunce wrote:

Tiny wrote:

dumbdunce wrote: 2.5", probably a few bits of other sizes. ugly I can do. does it need a whole system or just a patch up? tomorrow morning is better, have other jobs this arvo I've been putting off all day

off the botom of the dump pipe, and out the side, dont want you to do it this arvo, just want to look at the size of the pipe, 5 minutes, and I will bring a beer

sold! (will have to be before about 6, got people coming over - ok?)

pming address

prolly 530 by the time I get over there

no worries. I'll dig the bits out from under the house now while there's daylight.

if its like mine, you will be still goinng when I get there

didn't have as much as I thought - if it's any good to you, it's yours.

dumbdunce wrote:didn't have as much as I thought - if it's any good to you, it's yours.

not really, trying to get rif of the mufflers, not add more thanks anyway

Tiny wrote:

dumbdunce wrote:didn't have as much as I thought - if it's any good to you, it's yours.

not really, trying to get rif of the mufflers, not add more thanks anyway

thought so.

I think they are goin in the wheely bin.

when your in hornsby try north shore performance mufflers 10/113 hunter street hornsby behine ultra tune up the ramp he does alot of 4bs