Outer Limits 4x4 Board

Posted: **Wed Jul 13, 2005 3:34 pm**

Is there a way of reducing the length of the hubs from the axle stub.

IE: it looks like you need a massive offset rim on a zook to keep the hub inside the tyre profile. unlike the zook hubs.

cheers

Posted: **Wed Jul 13, 2005 6:57 pm**

nicbeer wrote:Is there a way of reducing the length of the hubs from the axle stub.

IE: it looks like you need a massive offset rim on a zook to keep the hub inside the tyre profile. unlike the zook hubs.

cheers

Its not realy possible other than fitting Drive Flanges Which may give you 1". The wheel bearings are right behind the free wheeling hub.

Outer Limits 4x4 Board

Shortening hilux hubs.

Shortening hilux hubs.

Re: Shortening hilux hubs.