Outer Limits 4x4 Board

Posted: **Mon Jul 18, 2005 8:27 am**

Hi,

I want to wire up the indicators, in the main cluster, which apparently don't come wired up in the Aussie cars

I'm sure there have been others outthere that have done this...just can't find any posts on the forum.

I was just wondering if the loom is wired for this already, or what it will entail to get them working

TIA
Jonty
PS: I am referring to the indicators in the main tail light cluster..NOT the lights in the bumper. Thanks

Posted: **Mon Jul 18, 2005 12:18 pm**

Come to think of it, this will be easy. If the loom is wired, then easy, just add globes! If it isn't, then one can just tap into the wiring for the indicators in the bumper...

Posted: **Mon Jul 18, 2005 12:29 pm**

http://members.dodo.net.au/~michaeljgoo ... ations.htm

Posted: **Mon Jul 18, 2005 12:41 pm**

Thats great, thanks a lot

Outer Limits 4x4 Board

Wiring up rear indicators on GU (in main cluster)

Wiring up rear indicators on GU (in main cluster)