Outer Limits 4x4 Board

Hey all...

So the thing's got 4 cracks in the head... no choice but to stick a new one in, and all the bits and pieces are ready to go.

Now, I've had thermostat problems that apparently caused the cracking, so I"m going to be changing that over and giving the cooling system a once over. Radiator looks good.

Is there anything I should get looked at while the top's off? Con rods etc are straight, no hassles with bits and bobs, we're getting new valves fitted just in case, not sticking in the intercooler just yet though...

Any suggestions, comments, sympathies will be accepted gratefully.

Have a look at

http://www.toyotasurf.asn.au/forum/

There are heaps of topics on the 2Lt Motors.


Cheers, Brad.

From what I understand if your heads stuffed replace it with a 3L head and this should most of the problems associated with the 2Lt head. But you will find it all on the above site

my mechanic said he'd sourced a new head... i better call him... does the 3L head bolt right in??