Page 1 of 1
adjusting load distribution thingy after lift kit
Posted: Sat Jul 23, 2005 2:33 pm
by rockcrawler31
hey. doing my 2" lift kit for a 91 troopy, was wondering if anyone could tell me how to adjust the load sensor for the brakes.
Posted: Sat Jul 23, 2005 2:43 pm
by sierrajim
does it not bolt to the diff?
If so just make an extension piece to lift it up in accordance with your lift kit.
Posted: Sat Jul 23, 2005 3:19 pm
by rockcrawler31
um ok
why didn't i think of that
ta heaps
Posted: Sat Jul 23, 2005 3:44 pm
by Slayer
it should have thread on one end for adjustment, they arnt super sensitive i dont think.. if the thread isnt enough yeh space it up off the diff the same amount as the truck has lifted..
Posted: Sat Jul 23, 2005 4:45 pm
by 4sum4
just bend it
Posted: Sun Jul 24, 2005 4:54 pm
by 80scruiser
Adjust it to 96mm between the adjuster end and the centre of the pin at the other end.
Try
www.lcool.org