Page 1 of 1
4age ruf hilux fronts on rear
Posted: Sun Jul 24, 2005 9:34 pm
by flyinwall
i was wondering if i could use a rear driveshaft on the front on my lwb since i am putting a 4age in which means i have to move the t/case back and i am putting rears up front which will move the front diff forward would this make enough room to run a rear shaft up front
Posted: Mon Jul 25, 2005 11:36 am
by Spike_Sierra
my guess is you would just have to see,
too many variables, how far you are moving your tcase back, how far you are moving your front diff forward, how long LWB rear driveshafts are normally..
my guess you will need longer then standard.
Posted: Mon Jul 25, 2005 6:31 pm
by small talk
Id agree with spike, SWB front shaft is about 200mm longer than a rear so my guess is a lenghtend or spaced front is your best bet.
Brock.
Posted: Mon Jul 25, 2005 9:20 pm
by Drew
yes you can do that,just measure everything.
i think the lwb rear shaft 200mm longer than the front
Posted: Tue Jul 26, 2005 11:57 am
by flyinwall
cool 200mm is about what i was thinking the new distance would be
thanks guys