Page 1 of 1
defected
Posted: Mon Jul 25, 2005 10:42 am
by johnboy
The hilux was defected on sunday for tyre 15mm outside the guards, not to fussed about that but he added a suspension deffect for the ifs being wound up WTF is with that not happy jan.
John
Posted: Mon Jul 25, 2005 11:00 am
by bazzle
Well you havnt told us much
What sort of vehicle?
How much top and bottom bump stop clearance?
May be he was correct..........?
Bazzle

Posted: Mon Jul 25, 2005 12:12 pm
by mkpatrol
bazzle wrote:Well you havnt told us much
What sort of vehicle?
How much top and bottom bump stop clearance?
May be he was correct..........?
Bazzle

Also, is the camber on the wheels excessive because you have wound up the torsion bars?
Posted: Mon Jul 25, 2005 2:54 pm
by phippsy
Did he defect the suspension after a possible disagreement about the tyres?? Maybe he just went looking for something....
Posted: Tue Jul 26, 2005 3:51 pm
by johnboy
picked for tyres then started to be nosey picked that there was only about 1/4" of upper bump stop clearance.
Now it has to have a full inspection.
Its an ifs hilux.
John
Posted: Tue Jul 26, 2005 4:06 pm
by Madmac
no big drama. just fit some flares then wind the bars back down for the inspection
Posted: Tue Jul 26, 2005 5:59 pm
by DeWsE
hi-luxmadness wrote:no big drama. just fit some flares then wind the bars back down for the inspection
But then wouldn't he be sitting on the bump stop?
Posted: Tue Jul 26, 2005 6:26 pm
by The Engineer
Is it possible to buy replacement bump stops to bring the clearences back into legal range? I have heard of low profile ones for the bottom, but what about extended ones for the tops?
Also where can you buy the low profile ones? I would prefer not to cut them.
Cheers
Justin
Posted: Tue Jul 26, 2005 6:33 pm
by Madmac
DeWsE wrote:hi-luxmadness wrote:no big drama. just fit some flares then wind the bars back down for the inspection
But then wouldn't he be sitting on the bump stop?
no the upper bumpstop will have more clearance
Posted: Wed Jul 27, 2005 10:09 am
by Utemad
Not sure if there are limits to how much you can wind them but I had my Rodeo inspected yesterday and the inspector asked me if I had wound mine. However it turns out he was just curious as he had just wound his
