90lux
Posted: Wed Jul 27, 2005 3:43 pm
Since i've killed three sets rear springs, one crown gear & totally screwed a drive shaft, i thought it is time to install the ladder bar that has been on the drawing board for so long. WAs going to install shakle type, but decided to go with sliding pipe design, i think it will be more effective due to less parts, prob stonger aswell. have also intalled sliders welded to 10mm plate then welded to chassis in three spots, still need to gusset for strength, will be very strong when finnished.
In the next few week's will be putting some plate and weld into front diff(rear already done0 to fix some front wheel grip on big climbes, am going to plumb oil cooler into power steer line to try & keep temp down. I'll try & post some pics but having trouble resizing.
Clint.
if pics don't work i will edit once resized by barathrum the nerd
In the next few week's will be putting some plate and weld into front diff(rear already done0 to fix some front wheel grip on big climbes, am going to plumb oil cooler into power steer line to try & keep temp down. I'll try & post some pics but having trouble resizing.
Clint.
if pics don't work i will edit once resized by barathrum the nerd
