Page 1 of 1
80 series suspension bolt size
Posted: Sun Jul 31, 2005 10:29 pm
by Cliffy
Just writing by prop. for the engineer, what size is the mounting bolts for the front suspension arms (diff end) and what size is the rear suspesnion mounting bolts for the arms. Just diameters.
Posted: Mon Aug 01, 2005 7:30 am
by dow50r
If it helps, the front bolts are 22mm socket (that should mean 18mm shank) and 24mm socket on the rear (20mm shank)
Andrew
Posted: Mon Aug 01, 2005 11:41 am
by 80UTE
Font panard and radius arms to diff housing are M16x1.5, Radius arm to chassis, all rear control arm's including rear panard are M18x1.5 bolt/thread size.
Wally
Posted: Mon Aug 01, 2005 1:53 pm
by Cliffy
Thanks guys just what I wanted.
