Outer Limits 4x4 Board

where do you get them from some one said you cant. is there a web site or some thing to go to?my mate got quoted 475 for normal ones.

OL in Balcatta, Perth distribute a "Brenchell CV, apparrently they are not too bad, looking at about $1000/pair last I spoke to them (they were just setting up) ph 08 93454877.

Otherwise, I just buy second hand genuine from wreckers and get slick at changing them

If you want some Haultech heavy duty CV's send RUFF a PM and he should be able to help you.

TOM

I can supply Brand new Haultech Heavy Duty treated CVs. We start with a Brand new NTN CV(same as fitted factory from nissan) and then heat treat and weld a ring on the bell. So far we have sold 10 sets and had no failures. Most of these were sold to guys that brake a cv every time they go out.

$350each plus $20each delivered anywhere in Aus. I have these in stock.

We also do these to suit Hilux and Landcruiser.

Pm me if you are interested.

thanks heaps 4 your help

Ruff - where are you in Brisbane, i am in New Zealand and maybe interested in some next time I am over your way
LArry

legsx1 wrote:Ruff - where are you in Brisbane, i am in New Zealand and maybe interested in some next time I am over your way
LArry

Haultech is Halfway between Bris and the Gold Coast. Place called Logan Village. But i currently live just off the highway at Loganholme. Which is 20 min less to travel.

Tony, Loganholme is just before Beenleigh if my memory serves me right and on the left heading south. We often turn off onto the Logan motorway to go to Springfield Lakes when coming back up from Robina.
What else do you sell for GQ's - I have one with a 96 corvette injected engine, but have only managed to brake one so far
Larry

I live just near the motorway.

This is the only product we make for GQs It only came about because the rings we weld on them are the same size as Hilux ones and we have been treating hilux ones for a couple of years now.