Page 1 of 1
4.2 gearbox hard to change gears
Posted: Mon Aug 01, 2005 10:18 pm
by Hoonz
is it time to change the oil?
its got a new daikin clutch in it ... clutch pedel seems to fade in and out
time to do the master cylinder seals?
Posted: Tue Aug 02, 2005 8:39 am
by muzza_fattire
You might be loosing vacuum assistance.
Check the hoses.
Posted: Wed Aug 03, 2005 11:38 am
by Hoonz
all the vac hoses are new .. checked anyhow ...
checked the oil in the box .. all good ..
think the master cylinder is gawn but its not loosing fluid
when i start up i can't change gears till i pump the clutch a dozen times
then it comes good then on occasion it'll lock up
Posted: Wed Aug 03, 2005 2:07 pm
by CJ Burns Esq
Air in the system.
Either a leak or not bled properly.