Outer Limits 4x4 Board

Ive got a lpg set that is still in the truck and wanting to pull it out to be fitted in another ,was wondering how do you let the lpg out of the tank to diconect the lines

you dont have to empty the tank to dissconect the lines
just turn off the valve on the tank and undo it you will get some gass come out but only whats in the line

pcman wrote:you dont have to empty the tank to dissconect the lines
just turn off the valve on the tank and undo it you will get some gass come out but only whats in the line

yeah done,too easy

4sum4 wrote:

pcman wrote:you dont have to empty the tank to dissconect the lines
just turn off the valve on the tank and undo it you will get some gass come out but only whats in the line

yeah done,too easy

If you want to be clever and not let the gas in the lines out everywhere, pull the tank solinoid's power connector off and then run the car on gas until it stops then start removing the kit, you will get hardly any discharge as you have effectively bled the system's lines.


Tom

turning the tap on the tank off and letting the vehicle run till it stalls does the same thing....

Snarba wrote:turning the tap on the tank off and letting the vehicle run till it stalls does the same thing....

yes it does

Punch a hole in it and run