Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

mongrels and simex tubes PSI

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 99
Joined: Thu Jun 02, 2005 9:52 pm
Location: Emerald

mongrels and simex tubes PSI

Post by Geoffrey Dick »

hey guys what PSI have people been running mongrels at (with tubes in) without losing a bead?
Top
Posts: 46
Joined: Wed Jun 15, 2005 10:53 pm
Location: Perth

Post by bigred »

With tubes 4psi
Punk Hater
Top
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Contact:
Contact christover1

Post by christover1 »

My Sierra has got 32" Mongrels with tubes front and tubeless rear ..normally run 10 offroad, but have recently been running 8...will probably run less after power steer.
I got frequent bead leaks on front, (different carcass brand to rear) hence the tubes in da front. But never lost the bead, even when almost flat.
Will probably tube the rear if I happy.

christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Top
Posts: 67
Joined: Tue Jun 22, 2004 8:12 pm
Location: Where ever I want to be

Post by cazook »

I run 32" Mongrels without tubes at 5 - 7 PSI regularly and don't have a problem with beads leaking.
Top
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

christover1 wrote:Will probably tube the rear if I happy.


That could be taken in more than one way :D

You might want to take into consideration the weight of your vehicle too. The heavier it is the more chance you will lose a bead for a given PSI.
Top
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Contact:
Contact christover1

Post by christover1 »

:rofl: :rofl:
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Top
Posts: 383
Joined: Fri Jul 15, 2005 7:35 pm
Location: Melbourne Victoria

Post by 84ZOOKSTA »

I run 31 simex centipedes with tubes. I usually run at 5psi and have never lost a bead.


Simon..
Hookers are like bowling balls, You pick them up, put your fingers in them, then throw them in the gutter and they come back for more.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 0 guests