Outer Limits 4x4 Board

Posted: **Thu Aug 11, 2005 8:43 pm**

anyone know were i would purchase the rubber bend for the top of snorkle? Going to use 4"stainless, and after the same rubber bend hat that "birdy" uses. Been told to check out truck retailers, an have been to 2 truck shops in kilsyth, an didnt have the exact product i was after.
Any help would be appreciated.

Thanks in advance...

Posted: **Fri Aug 12, 2005 4:57 pm**

try hose supply places that sell fuel hose ect

Posted: **Fri Aug 12, 2005 5:28 pm**

Ring queensland diesel spares as they retail them and may freight top you if not give me a call as I have an account with them.

Cris

07 5495 2211

Posted: **Fri Aug 12, 2005 5:39 pm**

try purple pig, they have heaps of rubber and hoses

corner stud road and mountain hwy
(03) 9720 6055

Posted: **Sat Aug 13, 2005 5:41 pm**

Truckbits in Dandynong near the Aussie Disposals warehouse.

Cheaper than Purple Pig

Posted: **Mon Aug 15, 2005 3:55 pm**

Thanks for your help guys checked out purple pig, didnt have any...Truck bits in Dandenong have them for $30.90... Have to make the trip to Dandypong!

Posted: **Mon Aug 15, 2005 5:06 pm**

Goutman wrote:Thanks for your help guys checked out purple pig, didnt have any...Truck bits in Dandenong have them for $30.90... Have to make the trip to Dandypong!

any pirtek, hydraulink / BAT ect will have rubber and cam clamps to suit by the metre, they ill usully sell the few centimetres you need, prolly some vac / suction hose will be the cheapest, they will be ribbed on the outside and bent tigh bends a little easier. just check the ID you need and then get the clamps to suit

irrigation shops should have the suction hose as well